Prices drop

Super-strLENGTH steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Adjustable HW scoring blade engineered for precise and chip-free scoring on laminated panels and wood-based materials.

• WZ geometry for clean scoring
• Low-noise body for reduced vibration
• Ideal for manual and mechanical panel saws

Adjustable PCD scoring blade designed for clean and accurate scoring on laminated panels. The PCD construction ensures superior wear resistance, while the adjustable width allows perfect alignment with the main saw blade. Suitable for professional horizontal panel saws.

Adjustable PCD scoring blade designed for accurate, chip-free scoring on laminated panels. The 6 mm PCD height ensures exceptional durability, while the adjustable width allows perfect alignment with the main blade. Ideal for professional horizontal panel saws.

Tool holder HSK50F with tollerance between the tool holder and tool house 0,003 mm.

Tool Holder HSK63F of various heights with arbor different size.

Tool Holder HSK63F of various heights with arbor different size. 

Replaceable standard ”ER16” collets (from 2 mm to 10 mm). Suitable for most conical chucks.

Replaceable standard ”ER20” collets (from 2 mm to 13 mm). Suitable for most conical chucks.

Replaceable standard ”ER25” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

Replaceable standard ”ER32” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

Replaceable high precision standard ”ER32” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

Replaceable standard ”ER40” collets (from 3 mm to 25 mm). Suitable for most conical chucks.

Replaceable high precision standard ”ER40” collets (from 3 mm to 25 mm). Suitable for most conical chucks.

Replaceable standard ”EOC25” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

GHIERA CUSCINETTI A SFERE D.50 ER32 DX MANDRINO HSK

Collet nut with chip extraction turbine applicable on tools holders HSKER32 HSKER40 EOC25 (DIN6388) and HYDRO ETP. The turbine replaces the standard collet nut or is externally applied to the HYDRO ETP spindle.

Suitable for thoothed flange

Universal cone remover for HSK63F and ISO30 TOOLS HOLDERS which allows you to disassemble the TOOL HOLDER without damaging their surfaces. The special bidirectional BEARING cage, blocking the tool holder, allows the flange to be dismantled or mounted.

Sawblade tool holder with shank for lamello clemex f22 and sawblades with hole 20/30.

Tool holder HSK63F INOX with tollerance between the tool holder and tool house 0,003 mm. Oxidation resistance.

Suitable for Homag, Eima from 9/94, Dubus, Weeke, Biesse, SCM, Morbidelli, Masterwood. Nut with bearing for tools with left or right rotation.

HYDRO HSK63F spindle with shaft/bore tolerance +/- 0.006. HSK63F high precision spindle and clamping force. TheTOOL shank must be with tolerance H6. Do not tighten the clamping screw if there is no tool inside. Clean the tool shank and the spindle hole thoroughly before inserting the cutter.

Bearing guided trimming bit in PCD diamond developed for precise, controlled manual trimming on panels and compact materials. The Z2 negative cutting geometry and the reduced axial angle provide stable cutting and a clean finish, even on delicate or coated surfaces.

• PCD cutting edge H2.5mm for extended service life
• Z2 negative geometry for stable, chip free edges
• Integrated bearing for accurate and repeatable trimming

Solid hardmetal helical tool with Z1 positive geometry designed for aluminium machining on CNC routers and machining centres, delivering stable cutting action and a clean surface finish.

• Z1 geometry for efficient chip flow
• Polished inner and outer flutes to reduce built up edge
• Suitable for high speed CNC work up to 24000 rpm

Carbide helical cutter with negative Z3 geometry and integrated chipbreaker, developed for precise lock mortising on doors and windows. The negative helix ensures clean surfaces, high stability and excellent chip control on laminated and wood based materials.

• Integrated chipbreaker for controlled chip evacuation
• Negative Z3 cutting geometry for stable finishing
• Ideal for door and window lock mortising

Helical PCD CNC router bit developed for contouring and finishing on coated panels and technical materials. The cutting layout combines Z2+2 on the top and bottom with Z1+1 in the central section, ensuring stable cutting, controlled material removal and a clean finish even on abrasive substrates.

• PCD insert H 2.5 mm, regrindable up to 3 times
• Combined Z1+1 / Z2+2 geometry for a stable cut
• Special steel body for rigidity and precision

PCD CNC router bit designed for contouring on coated panels and technical materials. The Z2+2 geometry with 3 helical divisions delivers cutting stability, controlled material removal and a clean finish, even on abrasive substrates.

• PCD insert H 2.5 mm, regrindable up to 3 times
• Z2+2 geometry for stable, precise contouring
• Special steel body for rigidity and reliability

Collet chuck ISO30 for Biesse, Omlat engine, Bulleri, Busellato, CMS, IMA, Alberti, Masterwood machines.

• ISO30 taper toolholder;
• Supplied complete with nut and drawbar (without collet);
• Maximum precision and reliability;
• Total elimination of rotation imperfections;
• HSK63F collet chuck manufactured from high-strength steel for superior performance;
• Precision ground on all contact surfaces;
• Fast and secure tool installation guaranteed.

Conical HW scoring blade designed for horizontal panel saws. Ideal for chipboard coated with paper or plastic films, veneered panels and layered woods such as plywood and multilayer. Ensures clean scoring, reduced chipping and high precision in continuous production cycles.

• Conical grind for optimal scoring
• Low Noise body to reduce vibration
• Ideal for coated and laminated panels

Super-strLENGTH steel. 2 precision ground carbide tipped cutting edges (Z2). Direct clamp on the shank of the drills.

Super-strLENGTH steel. 2 precision ground carbide tipped cutting edges (Z2). Direct clamp on the shank of the drills.

PCD H6 diamond blade engineered for clean, precise and stable panel cutting. The 6 mm diamond layer ensures superior durability, reduced wear and constant cutting quality on wood, composites and non-ferrous materials. FZ/TR/FA geometry provides smooth feed and minimal vibration.

PCD diamond router bit designed for surfacing, drilling and rebate operations on panels and wood based materials. The 4 flute Z4 geometry with 0° axial angle and center cutting edge delivers flat surfaces and precise machining.

• 4.5 mm PCD inserts for long service life
• Center cutting edge for combined drilling and surfacing
• 0.5 mm corner radius to avoid surfacing marks

Diamond surfacing cutter designed for accurate planing of panels and for cutting clean rebates on compact materials. The 0° axial angle and the R0.5 edge radius help minimize visible surfacing marks and deliver a more uniform finish, even on coated or delicate surfaces.

• PCD H4.5mm for long life and consistent results
• 0° axial angle for stable, controlled surfacing
• R0.5 radius to reduce marks and improve finish quality

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.

Tool holder ISO30 to be use on Morbidelli and SCM machines.

• Manufactured from special high-strength steel;
• Supplied complete with nut and drawbar (without collet);
• Maximum precision and reliability;
• Total elimination of rotation imperfections;
• For Morbidelli and SCM machines;
• Precision ground on all contact surfaces;
• Fast and secure tool installation guaranteed.

Diamond jointing cutter diameter 60 with helicoidal wings  PCD H2.5mm axial 30°.

Diamond jointing cutter D60 PCD H2.5mm axial 30° with low noise slots.

Diamond jointing cutter diameter 60 with helicoidal wings  PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots

Diamond jointing cutter diameter 70 with helicoidal wings  PCD  H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.

Diamond jointing cutter diameter 70 with helicoidal wings  PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings PCD H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots

Diamond jointing cutter with helicoidal wings PCD H4.5 mm axial 30°

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter diameter 100 with helicoidal wings PCD H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.

Diamond jointing cutter diameter 100 with helicoidal wings PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5 mm axial 30° with low noise slots

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter with helicoidal wings D100 PCD H4.5 mm axial 54.9°.

Diamond jointing cutter with helicoidal wings PCD H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter with helicoidal wings D100 PCD H4.5 mm axial 54.9°.

Jointing cutter with pcd inserts, PCD H3, axial 35°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Jointing cutter with pcd inserts, PCD H3, axial 45°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Jointing cutter with pcd inserts, PCD H3 mm, axial 54.9°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.

Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.

To trim edgebandings on horizontal spindles or for bevelling with inclinated spindles, for jointing and flush -cutting of solid wood, veneer and plastic edge bands for machines STEFANI-FRAVOL.

To trim edgebandings on horizontal spindles or for bevelling with inclinated spindles, for jointing and flush -cutting of solid wood, veneer and plastic edge bands for machines HOMAG - IMA.

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 30°.

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 45°.

For rounding solid wood, veneer and plastic edge bands for HOLZ-HER machine.

For rounding solid wood, veneer and plastic edge bands for HOLZHER 1832 with AIR SYSTEM

For rounding solid wood, veneer and plastic edge bands for HOLZ-HER 1827

For rounding solid wood, veneer and plastic edge bands for HOLZHER FR201 with AIR SYSTEM.

For rounding solid wood, veneer and plastic edge bands for HOLZHER 1833 WITH AIR SYSTEM.

For rounding and chamfering and rounding solid wood, veneer and plastic edge bands for HOLZ-HER 1826.

For rounding and chamfering and rounding solid wood, veneer and plastic edge bands for HOLZ-HER FR701.

For rounding solid wood, veneer and plastic edge bands for SCM - STEFANI ROUNDK AIR SYSTEM Z3.

For rounding solid wood, veneer and plastic edge bands for SCM - IDM C1/C2 CON AIR SYSTEM.

For rounding solid wood, veneer and plastic edge bands for BIESSE ERGHO AKRON.

For rounding solid wood, veneer and plastic edge bands for BIESSE.

For rounding solid wood, veneer and plastic edge bands for HOMAG FF - IMA.

For chamfering solid wood, veneer and plastic edge bands for HOMAG.

For rounding solid wood, veneer and plastic edge bands for HOMAG.

Helical CNC PCD router bit designed for contouring on pantographs and CNC machines. The predominantly positive axial geometry combined with a 30° axial angle promotes efficient chip evacuation toward the shank and superior surface finishes on panels.

• PCD inserts H 4.5 mm, regrindable up to 8 times
• Z2+2 geometry for stable, precise contours
• 30° axial angle for high-quality finishing

Helical PCD diamond cutter Z1+1 with 2.5 mm insert regrindable up to three times, designed for shank contouring on CNC machining centres. The three-helix geometry, with a first positive cutting edge followed by negative edges, ensures chip control, cutting stability and good surface quality.

• PCD insert H2.5 mm regrindable up to 3 times
• Z1+1 geometry for controlled contouring
• HW body for rigidity and accuracy

PCD Z1+1 router bit with guide bearing designed for trimming and contouring on CNC machines with manual or mechanical feed. The cost-effective PCD insert H 2.5 mm, regrindable up to three times, ensures cutting stability and a clean finish on coated panels.

• Guide bearing for precise trimming operations
• PCD insert H 2.5 mm, regrindable up to 3 times
• 3 helical divisions with positive/negative geometry

Helical PCD diamond grinding router bit designed for profiling and edging operations on coated panels and wood based materials. The Z3+3 geometry with symmetric helix and 54.9° axial angle ensures an exceptionally clean finish even on delicate surfaces.

• 4.5 mm PCD inserts, resharpenable up to 8 times
• Z3+3 geometry for smooth and continuous finish
• 54.9° axial angle for superior surface quality

Professional regrindable PCD diamond cutter with interrupted helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The heavy metal body and predominantly positive helix ensure stability, efficient chip evacuation and consistent surface quality even at high feed rates.

• Z3+3 PCD cutting edges with 3.5 mm height for long service life
• Interrupted helix for efficient chip evacuation
• Heavy metal body for rigidity and cutting accuracy

Professional PCD diamond cutter with six-division helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The predominantly negative axial angle and heavy metal body ensure stability, chip control and consistent surface quality on coated panels.

• Z3 PCD cutting edges with 3.5 mm height for long service life
• Six-division helix with negative angle for controlled finish
• Heavy metal body for rigidity and accuracy

PCD Z2+2 helical router bit designed for shank contouring on CNC machines with mechanical feed. The 4 helical divisions and the pulling geometry with a first positive insert ensure efficient chip evacuation, cutting stability and consistent quality on panels and wood-based materials.

• Z2+2 with 4 helices for productive, stable machining
• PCD insert H 2.5 mm for good tool life and a clean finish
• Special steel body with HW drilling tip

PCD Z1+1 helical router bit designed for CNC contouring applications with shank. The PCD diamond insert H 4.5 mm, regrindable up to eight times, combined with the steel body ensures long tool life, cutting stability and consistent quality even on coated panels.

• PCD insert H 4.5 mm, regrindable up to 8 times
• Z1+1 geometry with positive and negative helix
• Steel body for rigidity and reliability

Helical PCD router bit designed for shank contouring on coated panels and technical materials. The Z2+2 geometry with 3 helical divisions provides cutting stability, controlled material removal and a clean finish, even on abrasive substrates.

• PCD insert H 4.5 mm, regrindable up to 8 times
• Z2+2 geometry for stable, precise contouring
• Special steel body for rigidity and reliability