Prices drop

To trim edgebandings on horizontal spindles or for bevelling with inclinated spindles, for jointing and flush -cutting of solid wood, veneer and plastic edge bands for machines HOMAG - IMA.

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 30°.

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 45°.

For rounding solid wood, veneer and plastic edge bands for HOLZ-HER machine.

For rounding solid wood, veneer and plastic edge bands for HOLZHER 1832 with AIR SYSTEM

For rounding solid wood, veneer and plastic edge bands for HOLZ-HER 1827

For rounding solid wood, veneer and plastic edge bands for HOLZHER FR201 with AIR SYSTEM.

For rounding solid wood, veneer and plastic edge bands for HOLZHER 1833 WITH AIR SYSTEM.

For rounding and chamfering and rounding solid wood, veneer and plastic edge bands for HOLZ-HER 1826.

For rounding and chamfering and rounding solid wood, veneer and plastic edge bands for HOLZ-HER FR701.

For rounding solid wood, veneer and plastic edge bands for SCM - STEFANI ROUNDK AIR SYSTEM Z3.

For rounding solid wood, veneer and plastic edge bands for SCM - IDM C1/C2 CON AIR SYSTEM.

For rounding solid wood, veneer and plastic edge bands for BIESSE ERGHO AKRON.

For rounding solid wood, veneer and plastic edge bands for BIESSE.

For rounding solid wood, veneer and plastic edge bands for HOMAG FF - IMA.

For chamfering solid wood, veneer and plastic edge bands for HOMAG.

For rounding solid wood, veneer and plastic edge bands for HOMAG.

Helical CNC PCD router bit designed for contouring on pantographs and CNC machines. The predominantly positive axial geometry combined with a 30° axial angle promotes efficient chip evacuation toward the shank and superior surface finishes on panels.

• PCD inserts H 4.5 mm, regrindable up to 8 times
• Z2+2 geometry for stable, precise contours
• 30° axial angle for high-quality finishing

Helical PCD diamond cutter Z1+1 with 2.5 mm insert regrindable up to three times, designed for shank contouring on CNC machining centres. The three-helix geometry, with a first positive cutting edge followed by negative edges, ensures chip control, cutting stability and good surface quality.

• PCD insert H2.5 mm regrindable up to 3 times
• Z1+1 geometry for controlled contouring
• HW body for rigidity and accuracy

PCD Z1+1 router bit with guide bearing designed for trimming and contouring on CNC machines with manual or mechanical feed. The cost-effective PCD insert H 2.5 mm, regrindable up to three times, ensures cutting stability and a clean finish on coated panels.

• Guide bearing for precise trimming operations
• PCD insert H 2.5 mm, regrindable up to 3 times
• 3 helical divisions with positive/negative geometry

Helical PCD diamond grinding router bit designed for profiling and edging operations on coated panels and wood based materials. The Z3+3 geometry with symmetric helix and 54.9° axial angle ensures an exceptionally clean finish even on delicate surfaces.

• 4.5 mm PCD inserts, resharpenable up to 8 times
• Z3+3 geometry for smooth and continuous finish
• 54.9° axial angle for superior surface quality

Professional regrindable PCD diamond cutter with interrupted helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The heavy metal body and predominantly positive helix ensure stability, efficient chip evacuation and consistent surface quality even at high feed rates.

• Z3+3 PCD cutting edges with 3.5 mm height for long service life
• Interrupted helix for efficient chip evacuation
• Heavy metal body for rigidity and cutting accuracy

Professional PCD diamond cutter with six-division helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The predominantly negative axial angle and heavy metal body ensure stability, chip control and consistent surface quality on coated panels.

• Z3 PCD cutting edges with 3.5 mm height for long service life
• Six-division helix with negative angle for controlled finish
• Heavy metal body for rigidity and accuracy

PCD Z2+2 helical router bit designed for shank contouring on CNC machines with mechanical feed. The 4 helical divisions and the pulling geometry with a first positive insert ensure efficient chip evacuation, cutting stability and consistent quality on panels and wood-based materials.

• Z2+2 with 4 helices for productive, stable machining
• PCD insert H 2.5 mm for good tool life and a clean finish
• Special steel body with HW drilling tip

PCD Z1+1 helical router bit designed for CNC contouring applications with shank. The PCD diamond insert H 4.5 mm, regrindable up to eight times, combined with the steel body ensures long tool life, cutting stability and consistent quality even on coated panels.

• PCD insert H 4.5 mm, regrindable up to 8 times
• Z1+1 geometry with positive and negative helix
• Steel body for rigidity and reliability

Helical PCD router bit designed for high-performance contouring on coated panels and technical materials. The Z3+3 geometry with 3 helical divisions delivers high material removal rates, cutting stability and a clean finish even on abrasive substrates.

• PCD insert H 4.5 mm, regrindable up to 8 times
• Z3+3 geometry for high-performance CNC contouring
• Special steel body for maximum rigidity

PCD diamond cutter with right/left double rotation designed for contouring laminated panels where high surface quality on both sides is required. The combination of positive and negative cutting edges ensures balanced cutting action, stability and reduced chipping.

• PCD inserts 4.5 mm regrindable up to 8 times
• Right/left double rotation for superior top and bottom finish
• Special steel body for rigidity and precision

PCD diamond cutter with right/left double rotation designed for contouring laminated panels where high surface quality on both sides is required. The helical geometry with balanced cutting edges ensures stable cutting, reduced chipping and smooth machining.

• PCD inserts 4.5 mm regrindable up to 8 times
• Right/left double rotation for superior top and bottom finish
• 3 helical divisions for stable, smooth cutting

PCD Z1+1 helical router bit designed for CNC grooving and contouring on panels and wood-based materials. The cost-effective PCD insert H 2.5 mm, regrindable up to three times, combined with the steel body, offers a balanced solution in terms of performance, durability and cost.

• PCD insert H 2.5 mm, regrindable
• Z1+1 geometry with positive and negative helix
• Steel body for stability and reliability

FRESA ELICOIDALE HW POSITIVA D.6X22 SX ATT.6 Z.2 LT.65

CNC surfacing cutter designed for professional surfacing and leveling operations on CNC machine tables and large panels. The indexable PCD insert design ensures stable cutting, low noise and consistent surface finish on technical materials.

• Indexable PCD inserts for extended tool life
• Accurate CNC surfacing and table leveling
• Low noise and excellent surface quality

Insert PCD shank cutter multitasking with interchangeable profiled knife and copy bearing. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials. 

Insert PCD shank cutter multitasking with interchangeable profiled knife and center cutting knife. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.

Insert PCD shank cutter with interchangeable profiled knife Z=1. Suitable for profiling or engravings operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.

Insert PCD shank cutter with interchangeable profiled knife for cutting “V“ profiles at 90° / 91° Z=1. Suitable for profiling or for folding operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.

Insert PCD shank cutter with interchangeable profiled knife for cutting “V“ profiles at 90° / 91° Z=1+1. Suitable for profiling or for folding operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.

High-precision PCD insert cutter designed for surfacing and leveling operations on routers and CNC machining centers. Clean cutting, stable feed and uniform finish on abrasive boards, composites and non-ferrous materials.

• Replaceable PCD inserts for consistent performance
• Fast surfacing and accurate leveling in fewer passes
• Ideal for panels, composites and non-ferrous materials

Super-strLENGTH steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and LENGTH adjusting screw.

Industrial HW blade with chip limiter designed for rip cutting solid wood, softwoods and technical panels. Ensures controlled cutting, increased safety and clean finish with both manual and mechanical feed.

• Chip limiter for safer cutting
• WZ geometry for smooth finish
• MAN/MEC feed compatible

HW blade with concave cutting edge designed for squaring and crosscutting without a scoring unit. Perfect for vertical panel saws and laminated boards, delivering clean cuts, reduced chipping and excellent finishing even with manual or mechanical feed.

• HZ/DZ tooth geometry for clean, accurate cuts
• Low Noise body for vibration reduction
• Ideal for vertical panel saws and laminated boards

HW circular blade designed for professional panel saws, suitable for cutting single or stacked panels using a scoring blade. Its FZ/TR tooth geometry and Low Noise structure ensure accuracy, stability and excellent finishing on plastics, composites, MDF/HDF, plywood and laminated chipboard.

• Optimized for plastics and technical panels
• FZ/TR geometry for clean cuts in composites
• Ideal for professional panel saws with scorer

HW circular blade with internal rakers engineered for ripping and edging on multi-rip saws, single-rip saws and circular saw benches. Thanks to WZ geometry and Low Noise structure, it delivers high stability, reduced vibration and excellent performance on hardwood and softwood.

• Designed for hardwood and softwood
• Internal rakers for higher stability
• Ideal for multi-rip, single-rip and circular saws

HW circular blade designed for grooving with hole, folding operations and panel sizing on CNC machines, panel saws and automatic lines.

• FZ geometry for stable, clean cuts
• Ideal for plastics, MDF/HDF and plywood
• Excellent stability on CNC and automatic feeds

HW circular saw blade with positive teeth designed for cutting aluminum and other non-ferrous metals on circular saws and panel saws.

• FZ/TR/FA tooth geometry for smooth, accurate cutting
• Low-noise blade body to reduce vibration
• Developed for aluminum and light-alloy applications

HW circular saw blade by LEITZ engineered for professional cutting of wood and laminated panels. Designed for clean, precise and stable cuts even without a scoring blade, it ensures excellent feed, control and finishing on MDF, HDF, plywood and particleboard.

• Professional LEITZ performance
• Clean cutting on MDF, HDF and plywood
• Works perfectly even without scorer

HW circular saw blade with negative hook angle specifically designed for aluminium and non-ferrous material cutting. Ensures controlled feed, clean edges and burr-free finishing thanks to FZ/TR geometry.

• Ideal for aluminium and light alloys
• Negative hook angle for safety and stability
• Excellent finishing with reduced burrs

HW cutter designed for Lamello systems to create biscuit joints on CNC machines, manual routers and Zeta P2 Clamex P-System tools.

• Ideal for custom furniture and series production
• Suitable for carpentry and assembly work
• Available in an economical version for hobby users

HW LEITZ saw blade designed for table saws and horizontal panel saws, optimized for squaring and cutting laminated boards with scoring blade systems.

• LEITZ precision and stability
• Clean finishing on MDF, HDF, plywood and chipboard
• Perfect for professional panel processing

HW shank cutter Z2 negative for lamello clamex P-system

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Premium quality super-strLENGTH steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw LENGTH. Parallel shank with driving flat and adjustable screw LENGTH.

Premium quality super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH.

Premium quality super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH.

Premium quality super-strLENGTH steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw LENGTH. Parallel shank with driving flat and adjustable screw LENGTH.

PCD diamond cutter designed for producing Lamello biscuit joints on CNC routers and the manual Zeta P2 Clamex P-System machine. Ensures clean machining, precise fitting and excellent edge durability, ideal for both series production and custom furniture work.

PCD diamond cutter designed for creating Lamello Clamex P-SYSTEM joints on CNC routers and the Zeta P2 manual machine. Ensures high precision, clean machining and long tool life even under intensive use. Ideal for furniture production, interior renovations, shopfitting and exhibition construction.

Tool holder HSK63F with tollerance between the tool holder and tool house 0,003 mm.

• ER32 - ER40 taper shank toolholders;
• Maximum precision and reliability;
• Total elimination of any rotation imperfections;
• Constructed from high-strength steel for superior performance;
• Precision ground on all contact surfaces;
• Fast and secure tool installation guaranteed.

Nesting helical cutter in PCD diamond with Z2+2 geometry and 25° axial angle, built for CNC profiling and nesting with mechanical feed. The steel body delivers stiffness and stable cutting, while the enlarged chip gullet supports high feed rates and clean edges on coated panels and plywood.

• PCD H3.5mm for extended tool life and consistent cuts
• 2 flutes Z2+2 for efficient chip evacuation
• Steel body for maximum stability in nesting jobs

PCD blind holes drilling bit with high performance Z2. Suitable for drilling on laminated chipboard panels MDF.

PCD high performance blind holes drilling bit Z2+2 with negative shaver tips.

PCD high performance blind holes drilling bit Z2+2 with negative shaver tips and chip breaker. Suitable for drilling on laminated chipboard panels MDF.

PCD high performance blind holes drilling bit Z2+2 with negative countersink tips and HW center tip. Suitable for drilling on laminated chipboard panels MDF

PCD circular blade engineered for grooving applications with alternate bevel sharpening (DX/SX). The H6 PCD tip delivers superior durability and clean cutting results on MDF/HDF, particle board and plywood.

PCD circular blade engineered for accurate flat grooving on CNC machines and panel saws. The H6 PCD tip ensures exceptional durability, clean cutting and reduced vibration on MDF/HDF, chipboard and plywood.

Z2+2 PCD CNC router bit with a 45° axial angle, designed for high-precision contouring on wood-based panels and engineered materials. Polycrystalline diamond delivers premium finishing and extended tool life, even on abrasive substrates.

• PCD cutting edge H 4.5 mm for long service life
• 45° axial angle for clean, stable finishing
• Ideal for MDF, plywood and coated panels

PCD diamond CNC router bit for grooving and contouring on pantographs and machining centers with mechanical feed. Z3+3 geometry and a 30° axial angle deliver superior finishing and stable cutting on coated panels and abrasive materials.

• PCD insert H 4.5 mm, regrindable (up to 8 times)
• Z3+3 with 6 helices for smooth, precise machining
• Special steel body for rigidity and long service life

PCD Z2+2 CNC/router bit for shank contouring with mechanical feed, designed for CNC routers and pantographs. The 4 helical divisions and pulling geometry deliver efficient chip evacuation, cutting stability and a clean finish on coated panels and plywood.

• PCD H 4.5 mm with up to 8 regrinds for extended service life
• Z2+2 and 4 helices for productive, stable CNC contouring
• Special steel body with HW drilling tip

PCD pantograph router bit designed for contouring on pantographs and CNC machines. The Z3+3 configuration and predominantly positive axial geometry promote excellent chip evacuation and a clean finish, even on coated panels.

• PCD inserts H 4.5 mm, regrindable up to 8 times
• Z3+3 geometry for precise, stable contouring
• Special steel body for rigidity and long service life

PCD diamond cutter designed for contouring operations on compact and technical materials where high edge quality is required. The alternating positive and negative cutting geometry ensures balanced cutting action, stability and consistent edge finish.

• PCD cutting edges 3.5 mm for long tool life
• Alternating positive/negative edges for superior edge quality
• Solid HW body for rigidity and precision

PCD diamond cutter designed specifically for door lock mortising operations where dimensional accuracy and high-quality finishing of the lock plate area are required. The dedicated geometry ensures efficient chip evacuation inside the mortise and a clean visible edge.

• PCD cutting edges H 3.5 mm for long tool life
• Dedicated geometry for door lock mortises with clean finish
• Heavy metal body for maximum stability and vibration reduction

Helical PCD router bit designed for contouring on pantographs and CNC machines. The 30° axial angle ensures superior edge finishing and excellent surface quality on coated panels.

• PCD inserts H 4.5 mm, regrindable up to 8 times
• Z2+2 geometry for precise, stable contours
• 30° axial angle for high-quality finishes

PCD diamond Z1+1 router bit designed for cutting channels and profiling on panels and wood-based materials with high accuracy. The cost-effective H2.5 mm PCD tip and the heavy DENSIMET body deliver stability on small diameters and consistent finish. Made in Italy.

• PCD H2.5 mm tip resharpenable up to 3 times
• Z1+1 geometry for clean channels and profiling
• Heavy DENSIMET body for rigidity and low vibration

PCD diamond router bit designed for nesting and contouring on compact and abrasive materials. Alternating positive/negative cutting edges with a chipbreaker provide a combined roughing-and-finishing action, delivering excellent edge quality.

• PCD cutting edges H 3.5 mm, Z2 with alternating positive/negative geometry
• Chipbreaker design to rough and finish in a single pass
• Heavy metal HDM body for maximum stability

PCD diamond router bit designed for groove cutting with high surface quality on coated panels. The negative Z1 cutting edge and solid carbide body ensure maximum stability, controlled material removal and clean finishes even on delicate surfaces.

• PCD cutting edge H 3.5 mm for long tool life
• Negative Z1 cutting edge for superior panel finish
• Solid carbide body for high rigidity and stability

PCD diamond router bit designed for grooving coated panels where the highest surface quality is required. The negative Z2 cutting edges and solid carbide body ensure stability, controlled material removal and clean finishing even on delicate surfaces.

• PCD cutting edges H 3.5 mm for long tool life
• Negative Z2 cutting edges for superior surface finish
• Solid carbide body for rigidity and operational stability

PCD diamond router bit designed for grooving and contouring operations on CNC machines with manual or mechanical feed. The straight Z1 cutting edge and solid HW body ensure cutting stability, clean finishing and extended tool life.

• PCD cutting edge H 3.5 mm for long service life
• Straight Z1 geometry for controlled cutting
• Solid HW body for rigidity and precision

PCD diamond router bit designed for groove cutting and contouring on CNC machines with mechanical feed. The two straight Z2 cutting edges and solid carbide body provide balanced cutting action, improved stability and consistently high finish quality.

• PCD cutting edges H 3.5 mm for high durability
• Z2 configuration for higher stability and productivity
• Solid carbide body for rigidity and operational precision

PCD diamond router bit engineered for grooving operations on coated panels and wood-based materials when an excellent surface finish is required. The negative Z2 cutting geometry together with the steel body provides high stability, controlled chip removal and a clean, tear-free result.

• PCD cutting edges H 4 mm for extended tool life
• Negative Z2 geometry for chip-free surfaces and clean edges
• Steel body for robustness and machining accuracy

PCD diamond router bit designed for grooving, contouring and surfacing operations on CNC machines with manual or mechanical feed. The two straight Z2 cutting edges and the steel body ensure cutting stability, controlled material removal and consistent surface finish.

• PCD cutting edges H 4 mm for long tool life
• Z2 configuration for balanced and productive cutting
• Steel body for robustness and reliability

PCD diamond router bit designed for surfacing, drilling and rebate operations on coated panels and technical materials. The negative axial cutting concept and center cutting geometry improve chip control and deliver a cleaner side finish, even during continuous CNC runs.

• 4.5 mm PCD cutting edge for long tool life and high output
• Negative cutting edge for clean and stable side surfaces
• Center cutting geometry to surface and drill with accurate results

PCD diamond tools for cutting longitudinal joints for dimensionally stable construction part round arched joint.

PCD diamond tool developed for edge finishing and trimming on laminated panels where high edge quality is required. The helical layout with centre-converging symmetry and 40° axial angle delivers stable cutting and a uniform surface even in intensive CNC cycles.

• PCD inserts H 4.5 mm regrindable up to 8 times
• 8 helical divisions with symmetric geometry for consistent finish
• Steel body for rigidity and accuracy with mechanical feed

PCD H4 diamond blade designed for accurate, stable and quiet cutting of wooden panels, MDF, HDF, plywood and non-ferrous materials. The 4 mm PCD height provides extended durability and constant performance. FZ/TR/FA sharpening and positive angle ensure smooth feed in manual or mechanical cutting.

PCD diamond blade designed for CNC folding, ideal for machining V-grooves and folding channels on composite and technical panels. Ensures high stability, excellent finishing and long tool life with HSK63F AEM8038 or HSK arbor AEM8005 toolholders.

PCD diamond blade engineered for use on portable and battery-powered saws, ideal for cutting highly abrasive materials such as fibre cement, drywall and fibreglass gypsum boards. Provides exceptional durability, reduced vibration and reliable performance in construction, renovation and professional panel processing.