Processing

Regrindable PCD diamond router bit with interrupted helix, three divisions and three cutting edges engaged at the top and bottom. Predominantly negative helix, heavy-metal HDM body, PCD height H 3.5 mm. Built for CNC nesting: high feed rates, efficient chip extraction, good finish and low noise thanks to positive/negative cutting edges.

• PCD Z3+3 cutting edges for stable, continuous cutting
• Heavy-metal body for maximum rigidity
• Ideal for high-speed nesting

Professional regrindable PCD diamond cutter with interrupted helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The heavy metal body and predominantly positive helix ensure stability, efficient chip evacuation and consistent surface quality even at high feed rates.

• Z3+3 PCD cutting edges with 3.5 mm height for long service life
• Interrupted helix for efficient chip evacuation
• Heavy metal body for rigidity and cutting accuracy

Professional PCD diamond cutter with six-division helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The predominantly negative axial angle and heavy metal body ensure stability, chip control and consistent surface quality on coated panels.

• Z3 PCD cutting edges with 3.5 mm height for long service life
• Six-division helix with negative angle for controlled finish
• Heavy metal body for rigidity and accuracy

Helical PCD diamond cutter Z1+1 with 2.5 mm insert regrindable up to three times, designed for shank contouring on CNC machining centres. The three-helix geometry, with a first positive cutting edge followed by negative edges, ensures chip control, cutting stability and good surface quality.

• PCD insert H2.5 mm regrindable up to 3 times
• Z1+1 geometry for controlled contouring
• HW body for rigidity and accuracy

PCD diamond cutter designed for contouring operations on compact and technical materials where high edge quality is required. The alternating positive and negative cutting geometry ensures balanced cutting action, stability and consistent edge finish.

• PCD cutting edges 3.5 mm for long tool life
• Alternating positive/negative edges for superior edge quality
• Solid HW body for rigidity and precision

PCD diamond cutter with right/left double rotation designed for contouring laminated panels where high surface quality on both sides is required. The combination of positive and negative cutting edges ensures balanced cutting action, stability and reduced chipping.

• PCD inserts 4.5 mm regrindable up to 8 times
• Right/left double rotation for superior top and bottom finish
• Special steel body for rigidity and precision

PCD diamond cutter with right/left double rotation designed for contouring laminated panels where high surface quality on both sides is required. The helical geometry with balanced cutting edges ensures stable cutting, reduced chipping and smooth machining.

• PCD inserts 4.5 mm regrindable up to 8 times
• Right/left double rotation for superior top and bottom finish
• 3 helical divisions for stable, smooth cutting

PCD diamond cutter designed specifically for door lock mortising operations where dimensional accuracy and high-quality finishing of the lock plate area are required. The dedicated geometry ensures efficient chip evacuation inside the mortise and a clean visible edge.

• PCD cutting edges H 3.5 mm for long tool life
• Dedicated geometry for door lock mortises with clean finish
• Heavy metal body for maximum stability and vibration reduction

Nesting helical cutter in PCD diamond with Z2+2 geometry and 25° axial angle, built for CNC profiling and nesting with mechanical feed. The steel body delivers stiffness and stable cutting, while the enlarged chip gullet supports high feed rates and clean edges on coated panels and plywood.

• PCD H3.5mm for extended tool life and consistent cuts
• 2 flutes Z2+2 for efficient chip evacuation
• Steel body for maximum stability in nesting jobs

HW helical cutter with positive Z3 cutting edges designed for contouring, cutting and shaping operations on solid wood, wood based panels and plastic materials. The positive helix geometry ensures smooth cutting action, reduced cutting forces and improved surface finish even during continuous machining.

• HW Z3 cutting edges for clean and consistent finish
• Positive helix for efficient chip evacuation
• Ideal for CNC routers and mechanical feed systems

Bearing guided trimming bit in PCD diamond developed for precise, controlled manual trimming on panels and compact materials. The Z2 negative cutting geometry and the reduced axial angle provide stable cutting and a clean finish, even on delicate or coated surfaces.

• PCD cutting edge H2.5mm for extended service life
• Z2 negative geometry for stable, chip free edges
• Integrated bearing for accurate and repeatable trimming

Diamond surfacing cutter designed for accurate planing of panels and for cutting clean rebates on compact materials. The 0° axial angle and the R0.5 edge radius help minimize visible surfacing marks and deliver a more uniform finish, even on coated or delicate surfaces.

• PCD H4.5mm for long life and consistent results
• 0° axial angle for stable, controlled surfacing
• R0.5 radius to reduce marks and improve finish quality

PCD helical diamond router bit Z2+2 designed for machining thin panels with mechanical feed. The 5mm positive pulling lead insert improves entry, while the following negative inserts increase stability and control, delivering excellent finishes on delicate and coated surfaces.

• PCD H4.5mm resharpenable up to 8 times for long tool life
• 5mm positive lead PCD for clean cutting on thin panels
• 30° axial angle and 4 helical divisions for finish and chip evacuation

PCD helical nesting router bit Z3+3 engineered for shank profiling and high output nesting on CNC machines with mechanical feed. The interrupted helix with top and bottom cutting edges delivers stable cutting, efficient chip evacuation and a clean finish, while keeping noise and vibration low on coated panels.

• PCD Z3+3 cutting edges for stable top and bottom panel cutting
• Steel body and PCD center cutting for rigidity and accurate entry
• Interrupted helix with positive negative layout for finish and chip flow

PCD nesting diamond router bit, resharpenable and built with an interrupted helix in four divisions for CNC machining with mechanical feed on coated and decorative panels. The HDM heavy metal body boosts rigidity and enables very high feed rates with low noise, efficient chip evacuation and a clean, consistent finish.

• 3.5mm PCD, resharpenable edge for long service life and output
• HDM heavy metal body for maximum stability and reduced vibration
• Z2+2 with positive negative edges for crisp, accurate panel edges

Helical PCD diamond grinding router bit designed for profiling and edging operations on coated panels and wood based materials. The Z3+3 geometry with symmetric helix and 54.9° axial angle ensures an exceptionally clean finish even on delicate surfaces.

• 4.5 mm PCD inserts, resharpenable up to 8 times
• Z3+3 geometry for smooth and continuous finish
• 54.9° axial angle for superior surface quality

PCD diamond router bit designed for surfacing, drilling and rebate operations on panels and wood based materials. The 4 flute Z4 geometry with 0° axial angle and center cutting edge delivers flat surfaces and precise machining.

• 4.5 mm PCD inserts for long service life
• Center cutting edge for combined drilling and surfacing
• 0.5 mm corner radius to avoid surfacing marks

HW helical end mill with 1 flute and a positive Z1 cutting geometry, designed for grooving and shank profiling on CNC routers with mechanical feed. The positive helix promotes smooth chip evacuation and helps deliver a consistent surface finish while reducing vibration and material build-up on non-ferrous jobs.

• Single-flute HW Z1 edge for smooth cutting and clean sidewalls
• Positive helix for steady chip evacuation and less material welding
• Ideal for grooving and profiling on CNC machines with mechanical feed

HW helical end mill with a single flute and negative Z1 cutting geometry, designed for profiling and grooving with shank on CNC routers. The negative helix improves cutting control and helps prevent material lifting, delivering cleaner edges on coated and laminated panels.

• HW negative Z1 edge for controlled cutting and clean finishes
• Negative helix to reduce chipping on laminated materials
• Ideal for profiling and grooving on CNC routers

HW helical end mill with 2 flutes and a positive Z2 cutting geometry, designed for profiling, cutting and shaping with shank on CNC routers. The positive helix promotes smooth chip flow and stable cutting behaviour, ensuring consistent surface quality across a wide range of materials.

• Positive Z2 HW cutting edge for smooth and accurate cutting
• Two flutes for improved stability and controlled material removal
• Ideal for profiling, cutting and shaping on CNC machines

HW helical end mill with 2 flutes and a negative Z2 cutting geometry, designed for profiling cutting and shaping with shank on CNC machines. The negative helix improves cutting control and surface quality, reducing fibre lifting on coated and composite panels.

• Negative Z2 HW cutting edge for clean surfaces
• Two flutes for improved stability and control
• Ideal for profiling cutting and shaping on CNC

PCD diamond blade designed for bench saws and horizontal panel saws. The 10° internal axial angle ensures superior finishing, smooth feed and outstanding durability on laminated and composite materials.