Products

Re-sharpening compact hogger in diamond with positive cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines.

Re-sharpening compact hogger in diamond with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines. 

Re-sharpening radius hogger in diamond with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines

Re-sharpening hogger in diamond step design, with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines.

HW positive shank cutter to work door  lock slot. chip breaker Z3 with negative part for better finshing of plate house. Suitable to realize door lock slot and for routing, cutting on solid wood , laminated chipboard and plastic material.

PCD diamond Z1+1 router bit designed for cutting channels and profiling on panels and wood-based materials with high accuracy. The cost-effective H2.5 mm PCD tip and the heavy DENSIMET body deliver stability on small diameters and consistent finish. Made in Italy.

• PCD H2.5 mm tip resharpenable up to 3 times
• Z1+1 geometry for clean channels and profiling
• Heavy DENSIMET body for rigidity and low vibration

HW circular saw blade by LEITZ engineered for professional cutting of wood and laminated panels. Designed for clean, precise and stable cuts even without a scoring blade, it ensures excellent feed, control and finishing on MDF, HDF, plywood and particleboard.

• Professional LEITZ performance
• Clean cutting on MDF, HDF and plywood
• Works perfectly even without scorer

PCD diamond blade designed for bench saws and horizontal panel saws. The 10° internal axial angle ensures superior finishing, smooth feed and outstanding durability on laminated and composite materials.

Tool holder HSK63F with tollerance between the tool holder and tool house 0,003 mm.

• ER32 - ER40 taper shank toolholders;
• Maximum precision and reliability;
• Total elimination of any rotation imperfections;
• Constructed from high-strength steel for superior performance;
• Precision ground on all contact surfaces;
• Fast and secure tool installation guaranteed.

Collet chuck ISO30 for Biesse, Omlat engine, Bulleri, Busellato, CMS, IMA, Alberti, Masterwood machines.

• ISO30 taper toolholder;
• Supplied complete with nut and drawbar (without collet);
• Maximum precision and reliability;
• Total elimination of rotation imperfections;
• HSK63F collet chuck manufactured from high-strength steel for superior performance;
• Precision ground on all contact surfaces;
• Fast and secure tool installation guaranteed.

Tool holder ISO30 to be use on Morbidelli and SCM machines.

• Manufactured from special high-strength steel;
• Supplied complete with nut and drawbar (without collet);
• Maximum precision and reliability;
• Total elimination of rotation imperfections;
• For Morbidelli and SCM machines;
• Precision ground on all contact surfaces;
• Fast and secure tool installation guaranteed.

Tool holder HSK50F with tollerance between the tool holder and tool house 0,003 mm.

Tool Holder HSK63F of various heights with arbor different size.

Replaceable standard ”ER16” collets (from 2 mm to 10 mm). Suitable for most conical chucks.

Replaceable standard ”ER20” collets (from 2 mm to 13 mm). Suitable for most conical chucks.

Replaceable standard ”ER25” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

Replaceable standard ”ER32” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

Replaceable high precision standard ”ER32” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

Replaceable standard ”ER40” collets (from 3 mm to 25 mm). Suitable for most conical chucks.

Replaceable high precision standard ”ER40” collets (from 3 mm to 25 mm). Suitable for most conical chucks.

Replaceable standard ”EOC25” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

GHIERA CUSCINETTI A SFERE D.50 ER32 DX MANDRINO HSK

Suitable for thoothed flange

Universal cone remover for HSK63F and ISO30 TOOLS HOLDERS which allows you to disassemble the TOOL HOLDER without damaging their surfaces. The special bidirectional BEARING cage, blocking the tool holder, allows the flange to be dismantled or mounted.

HYDRO HSK63F spindle with shaft/bore tolerance +/- 0.006. HSK63F high precision spindle and clamping force. TheTOOL shank must be with tolerance H6. Do not tighten the clamping screw if there is no tool inside. Clean the tool shank and the spindle hole thoroughly before inserting the cutter.

Diamond jointing cutter diameter 60 with helicoidal wings  PCD H2.5mm axial 30°.

Diamond jointing cutter D60 PCD H2.5mm axial 30° with low noise slots.

Diamond jointing cutter diameter 60 with helicoidal wings  PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots

Diamond jointing cutter diameter 70 with helicoidal wings  PCD  H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.

Diamond jointing cutter diameter 70 with helicoidal wings  PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings PCD H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots

Diamond jointing cutter with helicoidal wings PCD H4.5 mm axial 30°

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter diameter 100 with helicoidal wings PCD H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.

Diamond jointing cutter diameter 100 with helicoidal wings PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5 mm axial 30° with low noise slots

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter with helicoidal wings D100 PCD H4.5 mm axial 54.9°.

Diamond jointing cutter with helicoidal wings PCD H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter with helicoidal wings D100 PCD H4.5 mm axial 54.9°.

Jointing cutter with pcd inserts, PCD H3, axial 35°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Jointing cutter with pcd inserts, PCD H3, axial 45°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Jointing cutter with pcd inserts, PCD H3 mm, axial 54.9°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.

Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.

To trim edgebandings on horizontal spindles or for bevelling with inclinated spindles, for jointing and flush -cutting of solid wood, veneer and plastic edge bands for machines HOMAG - IMA.

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 30°.

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 45°.

For rounding solid wood, veneer and plastic edge bands for HOLZHER FR201 with AIR SYSTEM.

For rounding solid wood, veneer and plastic edge bands for SCM - STEFANI ROUNDK AIR SYSTEM Z3.

For rounding solid wood, veneer and plastic edge bands for SCM - IDM C1/C2 CON AIR SYSTEM.

For rounding solid wood, veneer and plastic edge bands for BIESSE ERGHO AKRON.

For rounding solid wood, veneer and plastic edge bands for HOMAG FF - IMA.

PCD diamond router bit designed for groove cutting with high surface quality on coated panels. The negative Z1 cutting edge and solid carbide body ensure maximum stability, controlled material removal and clean finishes even on delicate surfaces.

• PCD cutting edge H 3.5 mm for long tool life
• Negative Z1 cutting edge for superior panel finish
• Solid carbide body for high rigidity and stability

PCD diamond router bit designed for groove cutting and contouring on CNC machines with mechanical feed. The two straight Z2 cutting edges and solid carbide body provide balanced cutting action, improved stability and consistently high finish quality.

• PCD cutting edges H 3.5 mm for high durability
• Z2 configuration for higher stability and productivity
• Solid carbide body for rigidity and operational precision

PCD diamond router bit designed for grooving coated panels where the highest surface quality is required. The negative Z2 cutting edges and solid carbide body ensure stability, controlled material removal and clean finishing even on delicate surfaces.

• PCD cutting edges H 3.5 mm for long tool life
• Negative Z2 cutting edges for superior surface finish
• Solid carbide body for rigidity and operational stability

PCD diamond router bit designed for grooving, contouring and surfacing operations on CNC machines with manual or mechanical feed. The two straight Z2 cutting edges and the steel body ensure cutting stability, controlled material removal and consistent surface finish.

• PCD cutting edges H 4 mm for long tool life
• Z2 configuration for balanced and productive cutting
• Steel body for robustness and reliability

PCD diamond router bit engineered for grooving operations on coated panels and wood-based materials when an excellent surface finish is required. The negative Z2 cutting geometry together with the steel body provides high stability, controlled chip removal and a clean, tear-free result.

• PCD cutting edges H 4 mm for extended tool life
• Negative Z2 geometry for chip-free surfaces and clean edges
• Steel body for robustness and machining accuracy

PCD helical router bit designed for contouring and grooving on both CNC and manual machines. The Z1+1 layout with two helical sections offers a solid balance between material removal, cutting stability and surface finish, especially on coated panels.

• Z1+1 configuration with positive and negative helix
• PCD diamond insert H 2.5 mm, regrindable
• Ideal for laminated panels and coated MDF

PCD Z1+1 helical router bit designed for CNC grooving and contouring on panels and wood-based materials. The cost-effective PCD insert H 2.5 mm, regrindable up to three times, combined with the steel body, offers a balanced solution in terms of performance, durability and cost.

• PCD insert H 2.5 mm, regrindable
• Z1+1 geometry with positive and negative helix
• Steel body for stability and reliability

PCD Z1+1 helical router bit designed for CNC contouring applications with shank. The PCD diamond insert H 4.5 mm, regrindable up to eight times, combined with the steel body ensures long tool life, cutting stability and consistent quality even on coated panels.

• PCD insert H 4.5 mm, regrindable up to 8 times
• Z1+1 geometry with positive and negative helix
• Steel body for rigidity and reliability

PCD Z1+1 router bit with guide bearing designed for trimming and contouring on CNC machines with manual or mechanical feed. The cost-effective PCD insert H 2.5 mm, regrindable up to three times, ensures cutting stability and a clean finish on coated panels.

• Guide bearing for precise trimming operations
• PCD insert H 2.5 mm, regrindable up to 3 times
• 3 helical divisions with positive/negative geometry

PCD Z2+2 helical router bit designed for shank contouring on CNC machines with mechanical feed. The 4 helical divisions and the pulling geometry with a first positive insert ensure efficient chip evacuation, cutting stability and consistent quality on panels and wood-based materials.

• Z2+2 with 4 helices for productive, stable machining
• PCD insert H 2.5 mm for good tool life and a clean finish
• Special steel body with HW drilling tip

PCD Z2+2 CNC/router bit for shank contouring with mechanical feed, designed for CNC routers and pantographs. The 4 helical divisions and pulling geometry deliver efficient chip evacuation, cutting stability and a clean finish on coated panels and plywood.

• PCD H 4.5 mm with up to 8 regrinds for extended service life
• Z2+2 and 4 helices for productive, stable CNC contouring
• Special steel body with HW drilling tip

Helical PCD CNC router bit developed for contouring and finishing on coated panels and technical materials. The cutting layout combines Z2+2 on the top and bottom with Z1+1 in the central section, ensuring stable cutting, controlled material removal and a clean finish even on abrasive substrates.

• PCD insert H 2.5 mm, regrindable up to 3 times
• Combined Z1+1 / Z2+2 geometry for a stable cut
• Special steel body for rigidity and precision

PCD CNC router bit designed for contouring on coated panels and technical materials. The Z2+2 geometry with 3 helical divisions delivers cutting stability, controlled material removal and a clean finish, even on abrasive substrates.

• PCD insert H 2.5 mm, regrindable up to 3 times
• Z2+2 geometry for stable, precise contouring
• Special steel body for rigidity and reliability

Helical PCD router bit designed for shank contouring on coated panels and technical materials. The Z2+2 geometry with 3 helical divisions provides cutting stability, controlled material removal and a clean finish, even on abrasive substrates.

• PCD insert H 4.5 mm, regrindable up to 8 times
• Z2+2 geometry for stable, precise contouring
• Special steel body for rigidity and reliability

Helical PCD router bit designed for high-performance contouring on coated panels and technical materials. The Z3+3 geometry with 3 helical divisions delivers high material removal rates, cutting stability and a clean finish even on abrasive substrates.

• PCD insert H 4.5 mm, regrindable up to 8 times
• Z3+3 geometry for high-performance CNC contouring
• Special steel body for maximum rigidity

Helical PCD router bit designed for contouring on pantographs and CNC machines. The 30° axial angle ensures superior edge finishing and excellent surface quality on coated panels.

• PCD inserts H 4.5 mm, regrindable up to 8 times
• Z2+2 geometry for precise, stable contours
• 30° axial angle for high-quality finishes

PCD diamond CNC router bit for grooving and contouring on pantographs and machining centers with mechanical feed. Z3+3 geometry and a 30° axial angle deliver superior finishing and stable cutting on coated panels and abrasive materials.

• PCD insert H 4.5 mm, regrindable (up to 8 times)
• Z3+3 with 6 helices for smooth, precise machining
• Special steel body for rigidity and long service life

Z2+2 PCD CNC router bit with a 45° axial angle, designed for high-precision contouring on wood-based panels and engineered materials. Polycrystalline diamond delivers premium finishing and extended tool life, even on abrasive substrates.

• PCD cutting edge H 4.5 mm for long service life
• 45° axial angle for clean, stable finishing
• Ideal for MDF, plywood and coated panels

PCD diamond pantograph router bit H 4.5 mm designed for high-precision CNC contouring on wood-based panels and engineered materials.

• Regrindable PCD cutting edge for long service life
• 45° axial angle for a clean finish
• Ideal for MDF, chipboard and plywood

PCD diamond router bit designed for nesting and contouring on compact and abrasive materials. Alternating positive/negative cutting edges with a chipbreaker provide a combined roughing-and-finishing action, delivering excellent edge quality.

• PCD cutting edges H 3.5 mm, Z2 with alternating positive/negative geometry
• Chipbreaker design to rough and finish in a single pass
• Heavy metal HDM body for maximum stability

PCD diamond router bit designed for high-performance nesting and contouring on CNC machines. The Z4 layout with alternating positive/negative cutting edges and a chipbreaker delivers efficient stock removal, cutting stability and consistent finishing even on technical and abrasive materials.

• Z4 PCD cutting edges with chipbreaker for high productivity
• Heavy metal HDM body for maximum stability
• Ideal for CNC nesting and precision contouring