Products

PCD pantograph router bit designed for contouring on pantographs and CNC machines. The Z3+3 configuration and predominantly positive axial geometry promote excellent chip evacuation and a clean finish, even on coated panels.

• PCD inserts H 4.5 mm, regrindable up to 8 times
• Z3+3 geometry for precise, stable contouring
• Special steel body for rigidity and long service life

Helical CNC PCD router bit designed for contouring on pantographs and CNC machines. The predominantly positive axial geometry combined with a 30° axial angle promotes efficient chip evacuation toward the shank and superior surface finishes on panels.

• PCD inserts H 4.5 mm, regrindable up to 8 times
• Z2+2 geometry for stable, precise contours
• 30° axial angle for high-quality finishing

PCD pantograph router bit designed for high-precision contouring on coated panels, MDF and plywood. The 54.9° axial angle ensures optimal chip evacuation and clean surfaces even when cutting against the grain.

• High-strength PCD diamond cutting edges H 4.5 mm
• Positive axial geometry for superior finishing on delicate panels
• Ideal for pantographs and CNC machines

PCD diamond router bit designed for grooving and contouring operations on CNC machines with manual or mechanical feed. The straight Z1 cutting edge and solid HW body ensure cutting stability, clean finishing and extended tool life.

• PCD cutting edge H 3.5 mm for long service life
• Straight Z1 geometry for controlled cutting
• Solid HW body for rigidity and precision

PCD diamond tool developed for edge finishing and trimming on laminated panels where high edge quality is required. The helical layout with centre-converging symmetry and 40° axial angle delivers stable cutting and a uniform surface even in intensive CNC cycles.

• PCD inserts H 4.5 mm regrindable up to 8 times
• 8 helical divisions with symmetric geometry for consistent finish
• Steel body for rigidity and accuracy with mechanical feed

Tool Holder HSK63F of various heights with arbor different size. 

Adjustable HW scoring blade engineered for precise and chip-free scoring on laminated panels and wood-based materials.

• WZ geometry for clean scoring
• Low-noise body for reduced vibration
• Ideal for manual and mechanical panel saws

HW circular blade designed for grooving with hole, folding operations and panel sizing on CNC machines, panel saws and automatic lines.

• FZ geometry for stable, clean cuts
• Ideal for plastics, MDF/HDF and plywood
• Excellent stability on CNC and automatic feeds

Carbide helical cutter with up down Z2+2 geometry, designed to achieve clean finishes on both top and bottom surfaces of the workpiece. Ideal for contouring cutting and shaping operations on wood based materials and plastics.

• Up down Z2+2 geometry for double side finishing
• Solid carbide cutting edges for precision
• Suitable for contouring cutting and shaping

HW circular saw blade with positive teeth designed for cutting aluminum and other non-ferrous metals on circular saws and panel saws.

• FZ/TR/FA tooth geometry for smooth, accurate cutting
• Low-noise blade body to reduce vibration
• Developed for aluminum and light-alloy applications

HW cutter designed for Lamello systems to create biscuit joints on CNC machines, manual routers and Zeta P2 Clamex P-System tools.

• Ideal for custom furniture and series production
• Suitable for carpentry and assembly work
• Available in an economical version for hobby users

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.

To trim edgebandings on horizontal spindles or for bevelling with inclinated spindles, for jointing and flush -cutting of solid wood, veneer and plastic edge bands for machines STEFANI-FRAVOL.

For rounding solid wood, veneer and plastic edge bands for HOLZ-HER machine.

For rounding solid wood, veneer and plastic edge bands for HOLZHER 1833 WITH AIR SYSTEM.

For rounding and chamfering and rounding solid wood, veneer and plastic edge bands for HOLZ-HER 1826.

For rounding solid wood, veneer and plastic edge bands for BIESSE.

For chamfering solid wood, veneer and plastic edge bands for HOMAG.

For rounding solid wood, veneer and plastic edge bands for HOMAG.

Collet nut with chip extraction turbine applicable on tools holders HSKER32 HSKER40 EOC25 (DIN6388) and HYDRO ETP. The turbine replaces the standard collet nut or is externally applied to the HYDRO ETP spindle.

Tool holder HSK63F INOX with tollerance between the tool holder and tool house 0,003 mm. Oxidation resistance.

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.

Super-strLENGTH steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw

Suitable for Homag, Eima from 9/94, Dubus, Weeke, Biesse, SCM, Morbidelli, Masterwood. Nut with bearing for tools with left or right rotation.

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Premium quality super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH.

Premium quality super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH.

Premium quality super-strLENGTH steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw LENGTH. Parallel shank with driving flat and adjustable screw LENGTH.

Premium quality HWM. 2 precision ground cutting edges (Z2), 2 spiral flutes. Common shank and drilling diametre (S=D).

Premium quality HWM. 2 precision ground cutting edges (Z2), 2 spiral flutes. Common shank and drilling diametre (S=D).

Super-strLENGTH steel. 2 precision ground carbide tipped cutting edges (Z2). Direct clamp on the shank of the drills.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

For rounding solid wood, veneer and plastic edge bands for HOLZHER 1832 with AIR SYSTEM

For rounding solid wood, veneer and plastic edge bands for HOLZ-HER 1827

For rounding and chamfering and rounding solid wood, veneer and plastic edge bands for HOLZ-HER FR701.

HW circular saw blade with negative hook angle specifically designed for aluminium and non-ferrous material cutting. Ensures controlled feed, clean edges and burr-free finishing thanks to FZ/TR geometry.

• Ideal for aluminium and light alloys
• Negative hook angle for safety and stability
• Excellent finishing with reduced burrs

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Sawblade tool holder with shank for lamello clemex f22 and sawblades with hole 20/30.

HW shank cutter Z2 negative for lamello clamex P-system