Jointing with shank

PCD diamond nesting router bit designed for high-productivity CNC machining on MDF, plywood and coated chipboard panels. The Z2+2 geometry and a 25° axial angle ensure efficient chip evacuation and clean finishing even in intensive nesting cycles.

• Specifically designed for CNC nesting operations
• PCD diamond H 3.5 mm for long tool life
• High stability and efficient chip evacuation

Nesting helical cutter in PCD diamond with Z2+2 geometry and 25° axial angle, built for CNC profiling and nesting with mechanical feed. The steel body delivers stiffness and stable cutting, while the enlarged chip gullet supports high feed rates and clean edges on coated panels and plywood.

• PCD H3.5mm for extended tool life and consistent cuts
• 2 flutes Z2+2 for efficient chip evacuation
• Steel body for maximum stability in nesting jobs

Regrindable PCD diamond router bit with interrupted helix, three divisions and three cutting edges engaged at the top and bottom. Predominantly negative helix, heavy-metal HDM body, PCD height H 3.5 mm. Built for CNC nesting: high feed rates, efficient chip extraction, good finish and low noise thanks to positive/negative cutting edges.

• PCD Z3+3 cutting edges for stable, continuous cutting
• Heavy-metal body for maximum rigidity
• Ideal for high-speed nesting

PCD helical nesting router bit Z3+3 engineered for shank profiling and high output nesting on CNC machines with mechanical feed. The interrupted helix with top and bottom cutting edges delivers stable cutting, efficient chip evacuation and a clean finish, while keeping noise and vibration low on coated panels.

• PCD Z3+3 cutting edges for stable top and bottom panel cutting
• Steel body and PCD center cutting for rigidity and accurate entry
• Interrupted helix with positive negative layout for finish and chip flow

Professional regrindable PCD diamond cutter with interrupted helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The heavy metal body and predominantly positive helix ensure stability, efficient chip evacuation and consistent surface quality even at high feed rates.

• Z3+3 PCD cutting edges with 3.5 mm height for long service life
• Interrupted helix for efficient chip evacuation
• Heavy metal body for rigidity and cutting accuracy

PCD nesting diamond router bit, resharpenable and built with an interrupted helix in four divisions for CNC machining with mechanical feed on coated and decorative panels. The HDM heavy metal body boosts rigidity and enables very high feed rates with low noise, efficient chip evacuation and a clean, consistent finish.

• 3.5mm PCD, resharpenable edge for long service life and output
• HDM heavy metal body for maximum stability and reduced vibration
• Z2+2 with positive negative edges for crisp, accurate panel edges

Professional PCD diamond cutter with six-division helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The predominantly negative axial angle and heavy metal body ensure stability, chip control and consistent surface quality on coated panels.

• Z3 PCD cutting edges with 3.5 mm height for long service life
• Six-division helix with negative angle for controlled finish
• Heavy metal body for rigidity and accuracy

PCD diamond cutter with right/left double rotation designed for contouring laminated panels where high surface quality on both sides is required. The combination of positive and negative cutting edges ensures balanced cutting action, stability and reduced chipping.

• PCD inserts 4.5 mm regrindable up to 8 times
• Right/left double rotation for superior top and bottom finish
• Special steel body for rigidity and precision

PCD diamond cutter with right/left double rotation designed for contouring laminated panels where high surface quality on both sides is required. The helical geometry with balanced cutting edges ensures stable cutting, reduced chipping and smooth machining.

• PCD inserts 4.5 mm regrindable up to 8 times
• Right/left double rotation for superior top and bottom finish
• 3 helical divisions for stable, smooth cutting

PCD diamond tool developed for edge finishing and trimming on laminated panels where high edge quality is required. The helical layout with centre-converging symmetry and 40° axial angle delivers stable cutting and a uniform surface even in intensive CNC cycles.

• PCD inserts H 4.5 mm regrindable up to 8 times
• 8 helical divisions with symmetric geometry for consistent finish
• Steel body for rigidity and accuracy with mechanical feed

Helical PCD diamond grinding router bit designed for profiling and edging operations on coated panels and wood based materials. The Z3+3 geometry with symmetric helix and 54.9° axial angle ensures an exceptionally clean finish even on delicate surfaces.

• 4.5 mm PCD inserts, resharpenable up to 8 times
• Z3+3 geometry for smooth and continuous finish
• 54.9° axial angle for superior surface quality

HW helical end mill with 1 flute and a positive Z1 cutting geometry, designed for grooving and shank profiling on CNC routers with mechanical feed. The positive helix promotes smooth chip evacuation and helps deliver a consistent surface finish while reducing vibration and material build-up on non-ferrous jobs.

• Single-flute HW Z1 edge for smooth cutting and clean sidewalls
• Positive helix for steady chip evacuation and less material welding
• Ideal for grooving and profiling on CNC machines with mechanical feed

HW helical end mill with a single flute and negative Z1 cutting geometry, designed for profiling and grooving with shank on CNC routers. The negative helix improves cutting control and helps prevent material lifting, delivering cleaner edges on coated and laminated panels.

• HW negative Z1 edge for controlled cutting and clean finishes
• Negative helix to reduce chipping on laminated materials
• Ideal for profiling and grooving on CNC routers

HW helical end mill with 2 flutes and a positive Z2 cutting geometry, designed for profiling, cutting and shaping with shank on CNC routers. The positive helix promotes smooth chip flow and stable cutting behaviour, ensuring consistent surface quality across a wide range of materials.

• Positive Z2 HW cutting edge for smooth and accurate cutting
• Two flutes for improved stability and controlled material removal
• Ideal for profiling, cutting and shaping on CNC machines

HW helical end mill with 2 flutes and a negative Z2 cutting geometry, designed for profiling cutting and shaping with shank on CNC machines. The negative helix improves cutting control and surface quality, reducing fibre lifting on coated and composite panels.

• Negative Z2 HW cutting edge for clean surfaces
• Two flutes for improved stability and control
• Ideal for profiling cutting and shaping on CNC

HW helical cutter with positive Z3 cutting edges designed for contouring, cutting and shaping operations on solid wood, wood based panels and plastic materials. The positive helix geometry ensures smooth cutting action, reduced cutting forces and improved surface finish even during continuous machining.

• HW Z3 cutting edges for clean and consistent finish
• Positive helix for efficient chip evacuation
• Ideal for CNC routers and mechanical feed systems

HW helical cutter with negative Z3 cutting edges designed for contouring, cutting and shaping operations on solid wood and wood based panels. The negative helix improves process control, helps reduce chipping on laminated surfaces and provides stable cutting performance with mechanical feed.

• HW Z3 cutting edges with negative helix for cleaner edges
• Better control and stability on laminated panels
• Ideal for CNC routers and pantographs up to 24,000 rpm

Carbide helical cutter with up down Z2+2 geometry, designed to achieve clean finishes on both top and bottom surfaces of the workpiece. Ideal for contouring cutting and shaping operations on wood based materials and plastics.

• Up down Z2+2 geometry for double side finishing
• Solid carbide cutting edges for precision
• Suitable for contouring cutting and shaping

Coated carbide helical cutter with up down Z2+2 geometry, developed for high speed nesting applications on wood based panels and composite materials. Provides clean finishing on both top and bottom surfaces with long tool life.

• Up down Z2+2 geometry for double side finishing
• Coated carbide for extended durability
• Ideal for high speed nesting operations

HW helical cutter with positive Z3 cutting edges and integrated chipbreaker designed for contouring, cutting and shaping operations on solid wood, wood based panels and plastic materials. The positive helix combined with the chipbreaker ensures controlled chip evacuation, smooth cutting action and consistent surface quality.

• HW Z3 cutting edges with chipbreaker for stable cutting
• Positive helix for efficient chip evacuation
• Ideal for CNC pantograph routers with mechanical feed

HW helical cutter with negative Z3 cutting edges and integrated chipbreaker designed for contouring, cutting and shaping on solid wood, wood based panels and plastic materials. The negative helix helps reduce chipping on laminated surfaces, while the chipbreaker improves chip control and cutting stability.

• HW Z3 cutting edges with negative helix for cleaner edges
• Integrated chipbreaker for chip control and stable cutting
• Ideal for CNC pantographs with mechanical feed

FRESA ELICOIDALE HW POSITIVA D.6X22 SX ATT.6 Z.2 LT.65

Positive helix carbide end mill Z3 with chipbreaker designed for finishing contouring, cutting and profiling on wood and composite materials. Provides high surface quality and controlled chip evacuation.

• Positive helix Z3 carbide cutting edges
• Integrated chipbreaker for smooth chip control
• Ideal for finishing contouring and profiling