Products

Diamond jointing cutter with helicoidal wings PCD H4.5 mm axial 30°

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter diameter 100 with helicoidal wings PCD H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.

Diamond jointing cutter diameter 100 with helicoidal wings PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5 mm axial 30° with low noise slots

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter with helicoidal wings D100 PCD H4.5 mm axial 54.9°.

Diamond jointing cutter with helicoidal wings PCD H2.5 mm axial 30°.

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings PCD H4.5 mm axial 30°.

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.

Diamond jointing cutter with helicoidal wings D100 PCD H4.5 mm axial 54.9°.

Jointing cutter with pcd inserts, PCD H3, axial 35°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Jointing cutter with pcd inserts, PCD H3, axial 45°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Jointing cutter with pcd inserts, PCD H3 mm, axial 54.9°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.

Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.

Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.

To trim edgebandings on horizontal spindles or for bevelling with inclinated spindles, for jointing and flush -cutting of solid wood, veneer and plastic edge bands for machines HOMAG - IMA.

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 30°.

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 45°.

For rounding solid wood, veneer and plastic edge bands for HOLZHER FR201 with AIR SYSTEM.

For rounding solid wood, veneer and plastic edge bands for SCM - STEFANI ROUNDK AIR SYSTEM Z3.

For rounding solid wood, veneer and plastic edge bands for SCM - IDM C1/C2 CON AIR SYSTEM.

For rounding solid wood, veneer and plastic edge bands for BIESSE ERGHO AKRON.

For rounding solid wood, veneer and plastic edge bands for HOMAG FF - IMA.

PCD diamond router bit designed for grooving operations requiring excellent surface quality on coated panels. The negative Z1 cutting edge and solid HW body ensure cutting stability, controlled material removal and clean surface finishing.

• PCD cutting edge H 3.5 mm for long service life
• Negative Z1 geometry for superior surface finish
• Solid HW body for rigidity and stability

PCD diamond router bit designed for grooving and contouring operations on CNC machines with mechanical feed. The dual straight Z2 cutting edges and solid HW body ensure balanced cutting action and consistent surface quality.

• PCD cutting edges H 3.5 mm for extended durability
• Z2 configuration for higher stability and productivity
• Solid HW body for rigidity and precision

PCD diamond router bit designed for grooving operations requiring excellent surface quality on coated panels. The negative Z2 cutting edges and solid HW body ensure controlled cutting action and clean surface finishing.

• PCD cutting edges H 3.5 mm for long service life
• Negative Z2 geometry for superior surface quality
• Solid HW body for rigidity and stability

PCD diamond router bit designed for grooving, contouring and surfacing operations on CNC machines with manual or mechanical feed. The dual straight Z2 cutting edges and steel body ensure cutting stability and consistent finishing.

• PCD cutting edges H 4 mm for extended tool life
• Z2 configuration for balanced and productive cutting
• Steel body for strength and reliability

PCD diamond router bit designed for grooving operations requiring excellent surface quality on coated and laminated panels. The negative Z2 cutting edges and steel body ensure controlled cutting action and clean surface finishing.

• PCD cutting edges H 4 mm for long service life
• Negative Z2 geometry for superior surface quality
• Steel body for robustness and stability

PCD helical router bit designed for contouring and grooving operations on CNC and manual machines. The Z1+1 configuration with dual helix geometry provides balanced cutting action and consistent surface finish on coated panels.

• Z1+1 helical geometry with positive and negative edges
• PCD insert H 2.5 mm, regrindable
• Suitable for laminated panels and coated MDF

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body.

PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z1+1 with copy bearing, eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

PCD shank cutter Z2+2 on top and bottom part Z1+1 in the midle part with PCD tips H2,5 mm resharpened up to 3 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

PCD shank cutter Z2+2 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing , firt tip positive all the others negative, plunge tip in HW,cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD diamond router bit designed for nesting and contouring operations on compact and abrasive materials. The alternating positive and negative cutting edges with chipbreaker provide combined roughing and finishing in a single pass.

• PCD cutting edges H 3.5 mm with alternating Z2 geometry
• Chipbreaker design for roughing and finishing
• Heavy HDM body for maximum stability

PCD router bit designed for high-speed nesting and contouring on CNC machines. The Z4 chipbreaker configuration with alternating positive and negative cutting edges ensures excellent chip evacuation, cutting stability and superior surface finish on technical materials.

• Z4 PCD chipbreaker cutting edges for high productivity
• Heavy-duty HDM body for maximum rigidity
• Ideal for CNC nesting and precision contouring