Best sellers

Tool holder HSK63F with tollerance between the tool holder and tool house 0,003 mm.

• ER32 - ER40 taper shank toolholders;
• Maximum precision and reliability;
• Total elimination of any rotation imperfections;
• Constructed from high-strength steel for superior performance;
• Precision ground on all contact surfaces;
• Fast and secure tool installation guaranteed.

HW helical end mill with 1 flute and a positive Z1 cutting geometry, designed for grooving and shank profiling on CNC routers with mechanical feed. The positive helix promotes smooth chip evacuation and helps deliver a consistent surface finish while reducing vibration and material build-up on non-ferrous jobs.

• Single-flute HW Z1 edge for smooth cutting and clean sidewalls
• Positive helix for steady chip evacuation and less material welding
• Ideal for grooving and profiling on CNC machines with mechanical feed

PCD diamond nesting router bit designed for high-productivity CNC machining on MDF, plywood and coated chipboard panels. The Z2+2 geometry and a 25° axial angle ensure efficient chip evacuation and clean finishing even in intensive nesting cycles.

• Specifically designed for CNC nesting operations
• PCD diamond H 3.5 mm for long tool life
• High stability and efficient chip evacuation

PCD diamond router bit designed for high-performance nesting and contouring on CNC machines. The Z4 layout with alternating positive/negative cutting edges and a chipbreaker delivers efficient stock removal, cutting stability and consistent finishing even on technical and abrasive materials.

• Z4 PCD cutting edges with chipbreaker for high productivity
• Heavy metal HDM body for maximum stability
• Ideal for CNC nesting and precision contouring

Coated carbide helical cutter with up down Z2+2 geometry, developed for high speed nesting applications on wood based panels and composite materials. Provides clean finishing on both top and bottom surfaces with long tool life.

• Up down Z2+2 geometry for double side finishing
• Coated carbide for extended durability
• Ideal for high speed nesting operations

Replaceable standard ”ER40” collets (from 3 mm to 25 mm). Suitable for most conical chucks.

PCD Z1+1 router bit with guide bearing designed for trimming and contouring on CNC machines with manual or mechanical feed. The cost-effective PCD insert H 2.5 mm, regrindable up to three times, ensures cutting stability and a clean finish on coated panels.

• Guide bearing for precise trimming operations
• PCD insert H 2.5 mm, regrindable up to 3 times
• 3 helical divisions with positive/negative geometry

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

PCD nesting diamond router bit, resharpenable and built with an interrupted helix in four divisions for CNC machining with mechanical feed on coated and decorative panels. The HDM heavy metal body boosts rigidity and enables very high feed rates with low noise, efficient chip evacuation and a clean, consistent finish.

• 3.5mm PCD, resharpenable edge for long service life and output
• HDM heavy metal body for maximum stability and reduced vibration
• Z2+2 with positive negative edges for crisp, accurate panel edges

Professional PCD diamond cutter with six-division helix and three effective cutting edges, designed for nesting and shank contouring on CNC machining centres. The predominantly negative axial angle and heavy metal body ensure stability, chip control and consistent surface quality on coated panels.

• Z3 PCD cutting edges with 3.5 mm height for long service life
• Six-division helix with negative angle for controlled finish
• Heavy metal body for rigidity and accuracy

PCD Z2+2 helical router bit designed for shank contouring on CNC machines with mechanical feed. The 4 helical divisions and the pulling geometry with a first positive insert ensure efficient chip evacuation, cutting stability and consistent quality on panels and wood-based materials.

• Z2+2 with 4 helices for productive, stable machining
• PCD insert H 2.5 mm for good tool life and a clean finish
• Special steel body with HW drilling tip

PCD helical router bit designed for contouring and grooving on both CNC and manual machines. The Z1+1 layout with two helical sections offers a solid balance between material removal, cutting stability and surface finish, especially on coated panels.

• Z1+1 configuration with positive and negative helix
• PCD diamond insert H 2.5 mm, regrindable
• Ideal for laminated panels and coated MDF

PCD diamond router bit engineered for grooving operations on coated panels and wood-based materials when an excellent surface finish is required. The negative Z2 cutting geometry together with the steel body provides high stability, controlled chip removal and a clean, tear-free result.

• PCD cutting edges H 4 mm for extended tool life
• Negative Z2 geometry for chip-free surfaces and clean edges
• Steel body for robustness and machining accuracy

PCD diamond router bit designed for grooving coated panels where the highest surface quality is required. The negative Z2 cutting edges and solid carbide body ensure stability, controlled material removal and clean finishing even on delicate surfaces.

• PCD cutting edges H 3.5 mm for long tool life
• Negative Z2 cutting edges for superior surface finish
• Solid carbide body for rigidity and operational stability

HW positive shank cutter to work door  lock slot. chip breaker Z3 with negative part for better finshing of plate house. Suitable to realize door lock slot and for routing, cutting on solid wood , laminated chipboard and plastic material.

Sawblade tool holder with shank for lamello clemex f22 and sawblades with hole 20/30.

Collet nut with chip extraction turbine applicable on tools holders HSKER32 HSKER40 EOC25 (DIN6388) and HYDRO ETP. The turbine replaces the standard collet nut or is externally applied to the HYDRO ETP spindle.

Conical HW scoring blade designed for horizontal panel saws. Ideal for chipboard coated with paper or plastic films, veneered panels and layered woods such as plywood and multilayer. Ensures clean scoring, reduced chipping and high precision in continuous production cycles.

• Conical grind for optimal scoring
• Low Noise body to reduce vibration
• Ideal for coated and laminated panels

PCD diamond cutter designed for creating Lamello Clamex P-SYSTEM joints on CNC routers and the Zeta P2 manual machine. Ensures high precision, clean machining and long tool life even under intensive use. Ideal for furniture production, interior renovations, shopfitting and exhibition construction.

HW helical cutter with negative Z3 cutting edges designed for lock mortises on doors and windows on CNC machines. The negative helix improves top edge quality, reducing chipping and ensuring cleaner finishes on laminated boards and coated panels.

• Negative HW Z3 cutting edges for clean top edges
• Ideal for door and window lock mortises
• Stable cutting performance in CNC machining

HW helical cutter with positive Z3 cutting edges and integrated chipbreaker designed for lock mortises on doors and windows on CNC machines. The positive geometry provides smooth cutting and efficient chip evacuation, while the chipbreaker improves chip control and machining stability even on laminated boards.

• Positive HW Z3 cutting edges for accurate mortises
• Integrated chipbreaker for chip control and stable cutting
• Ideal for door and window lock pockets

Helical PCD diamond cutter Z1+1 with 2.5 mm insert regrindable up to three times, designed for shank contouring on CNC machining centres. The three-helix geometry, with a first positive cutting edge followed by negative edges, ensures chip control, cutting stability and good surface quality.

• PCD insert H2.5 mm regrindable up to 3 times
• Z1+1 geometry for controlled contouring
• HW body for rigidity and accuracy

PCD Z1+1 helical router bit designed for CNC contouring applications with shank. The PCD diamond insert H 4.5 mm, regrindable up to eight times, combined with the steel body ensures long tool life, cutting stability and consistent quality even on coated panels.

• PCD insert H 4.5 mm, regrindable up to 8 times
• Z1+1 geometry with positive and negative helix
• Steel body for rigidity and reliability

PCD Z1+1 helical router bit designed for CNC grooving and contouring on panels and wood-based materials. The cost-effective PCD insert H 2.5 mm, regrindable up to three times, combined with the steel body, offers a balanced solution in terms of performance, durability and cost.

• PCD insert H 2.5 mm, regrindable
• Z1+1 geometry with positive and negative helix
• Steel body for stability and reliability

PCD diamond router bit designed for grooving, contouring and surfacing operations on CNC machines with manual or mechanical feed. The two straight Z2 cutting edges and the steel body ensure cutting stability, controlled material removal and consistent surface finish.

• PCD cutting edges H 4 mm for long tool life
• Z2 configuration for balanced and productive cutting
• Steel body for robustness and reliability

Jointing cutter with pcd inserts, PCD H2,5 mm, axial 30°.

Universal cone remover for HSK63F and ISO30 TOOLS HOLDERS which allows you to disassemble the TOOL HOLDER without damaging their surfaces. The special bidirectional BEARING cage, blocking the tool holder, allows the flange to be dismantled or mounted.

Replaceable high precision standard ”ER32” collets (from 3 mm to 20 mm). Suitable for most conical chucks.

Replaceable standard ”ER32” collets (from 3 mm to 20 mm). Suitable for most conical chucks.