Prices drop

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

PCD shank cutter Z2+2 on top and bottom part Z1+1 in the midle part with PCD tips H2,5 mm resharpened up to 3 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, HW body.

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in DIA steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body.

PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z1+1 with copy bearing, eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, HDM (High density metal) and steel body.

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, steel body.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 mm with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 54,9° steel body. Suitable for working high-performance jointing and sizing of solid woods (free of knots) along and accross the grain, jointing of melamine, paper, HPL laminated, foiled and veneered panels and lacquered surfaces, on chipboard, playwood, laminated and MDF.

PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z2+2 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing , firt tip positive all the others negative, plunge tip in HW,cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood and MDF.

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated and MDF.

PCD helicoidal shank cutter Z2+2 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD steel body cutting angle 30°. Suitable for working on laminated chipboard panels, playwood, laminated and laminated MDF.