Prices drop

PCD diamond router bit designed for grooving, contouring and surfacing operations on CNC machines with manual or mechanical feed. The two straight Z2 cutting edges and the steel body ensure cutting stability, controlled material removal and consistent surface finish.

• PCD cutting edges H 4 mm for long tool life
• Z2 configuration for balanced and productive cutting
• Steel body for robustness and reliability

PCD diamond router bit designed for surfacing, drilling and rebate operations on coated panels and technical materials. The negative axial cutting concept and center cutting geometry improve chip control and deliver a cleaner side finish, even during continuous CNC runs.

• 4.5 mm PCD cutting edge for long tool life and high output
• Negative cutting edge for clean and stable side surfaces
• Center cutting geometry to surface and drill with accurate results

PCD diamond tools for cutting longitudinal joints for dimensionally stable construction part round arched joint.

PCD diamond tool developed for edge finishing and trimming on laminated panels where high edge quality is required. The helical layout with centre-converging symmetry and 40° axial angle delivers stable cutting and a uniform surface even in intensive CNC cycles.

• PCD inserts H 4.5 mm regrindable up to 8 times
• 8 helical divisions with symmetric geometry for consistent finish
• Steel body for rigidity and accuracy with mechanical feed

PCD H4 diamond blade designed for accurate, stable and quiet cutting of wooden panels, MDF, HDF, plywood and non-ferrous materials. The 4 mm PCD height provides extended durability and constant performance. FZ/TR/FA sharpening and positive angle ensure smooth feed in manual or mechanical cutting.

PCD diamond blade designed for CNC folding, ideal for machining V-grooves and folding channels on composite and technical panels. Ensures high stability, excellent finishing and long tool life with HSK63F AEM8038 or HSK arbor AEM8005 toolholders.

PCD diamond blade engineered for use on portable and battery-powered saws, ideal for cutting highly abrasive materials such as fibre cement, drywall and fibreglass gypsum boards. Provides exceptional durability, reduced vibration and reliable performance in construction, renovation and professional panel processing.

PCD H4 diamond scoring blade engineered for stable, chip-free scoring on bilaminated, MDF and coated panels. Suitable for horizontal panel saws with height-adjustable scoring units.

PCD H4 trapezoidal diamond blade designed for accurate, stable and low-vibration cutting of wood, MDF, HDF, plywood and non-ferrous materials. The 4 mm PCD height ensures long durability and consistent results even on abrasive panels. Ideal for manual feed cutting.

PCD diamond blade designed for bench saws and horizontal panel saws. The 10° internal axial angle ensures superior finishing, smooth feed and outstanding durability on laminated and composite materials.

PCD diamond blade dedicated to CNC folding, ideal for producing V-grooves, folding channels and accurate bending profiles on composite and technical panels. Its 6 mm PCD edge ensures extended tool life and consistent finishing even in demanding production cycles.

PCD H6 diamond scoring blade designed for precise, chip-free scoring on bilaminated, MDF and coated panels. Suitable for horizontal panel saws with height-adjustable scoring units.

PCD H6 trapezoidal diamond blade engineered for high-precision cutting of wood panels, MDF, HDF, plywood and non-ferrous materials. The 6 mm PCD height ensures superior durability and consistent cutting even on abrasive boards. Suitable for both manual and mechanical feed.

PCD helical diamond router bit Z2+2 designed for machining thin panels with mechanical feed. The 5mm positive pulling lead insert improves entry, while the following negative inserts increase stability and control, delivering excellent finishes on delicate and coated surfaces.

• PCD H4.5mm resharpenable up to 8 times for long tool life
• 5mm positive lead PCD for clean cutting on thin panels
• 30° axial angle and 4 helical divisions for finish and chip evacuation

PCD helical nesting router bit Z3+3 engineered for shank profiling and high output nesting on CNC machines with mechanical feed. The interrupted helix with top and bottom cutting edges delivers stable cutting, efficient chip evacuation and a clean finish, while keeping noise and vibration low on coated panels.

• PCD Z3+3 cutting edges for stable top and bottom panel cutting
• Steel body and PCD center cutting for rigidity and accurate entry
• Interrupted helix with positive negative layout for finish and chip flow

PCD nesting diamond router bit, resharpenable and built with an interrupted helix in four divisions for CNC machining with mechanical feed on coated and decorative panels. The HDM heavy metal body boosts rigidity and enables very high feed rates with low noise, efficient chip evacuation and a clean, consistent finish.

• 3.5mm PCD, resharpenable edge for long service life and output
• HDM heavy metal body for maximum stability and reduced vibration
• Z2+2 with positive negative edges for crisp, accurate panel edges

Regrindable PCD diamond router bit with interrupted helix, three divisions and three cutting edges engaged at the top and bottom. Predominantly negative helix, heavy-metal HDM body, PCD height H 3.5 mm. Built for CNC nesting: high feed rates, efficient chip extraction, good finish and low noise thanks to positive/negative cutting edges.

• PCD Z3+3 cutting edges for stable, continuous cutting
• Heavy-metal body for maximum rigidity
• Ideal for high-speed nesting

PCD diamond nesting router bit designed for high-productivity CNC machining on MDF, plywood and coated chipboard panels. The Z2+2 geometry and a 25° axial angle ensure efficient chip evacuation and clean finishing even in intensive nesting cycles.

• Specifically designed for CNC nesting operations
• PCD diamond H 3.5 mm for long tool life
• High stability and efficient chip evacuation

PCD diamond pantograph router bit H 4.5 mm designed for high-precision CNC contouring on wood-based panels and engineered materials.

• Regrindable PCD cutting edge for long service life
• 45° axial angle for a clean finish
• Ideal for MDF, chipboard and plywood

PCD pantograph router bit designed for high-precision contouring on coated panels, MDF and plywood. The 54.9° axial angle ensures optimal chip evacuation and clean surfaces even when cutting against the grain.

• High-strength PCD diamond cutting edges H 4.5 mm
• Positive axial geometry for superior finishing on delicate panels
• Ideal for pantographs and CNC machines

PCD shank cutter Z1 for lamello clamex P-system Z1.

PCD T-SLOT BITS Z2+2 for aluminum profiles.

PCD through hole drilling bit with high performance Z1. Suitable for through hole on laminated chipboard panels MDF.

PCD through hole drilling bit with high performance Z2. Suitable for through hole on laminated chipboard panels MDF.

PCD helical router bit designed for contouring and grooving on both CNC and manual machines. The Z1+1 layout with two helical sections offers a solid balance between material removal, cutting stability and surface finish, especially on coated panels.

• Z1+1 configuration with positive and negative helix
• PCD diamond insert H 2.5 mm, regrindable
• Ideal for laminated panels and coated MDF

PCD diamond router bit designed for high-performance nesting and contouring on CNC machines. The Z4 layout with alternating positive/negative cutting edges and a chipbreaker delivers efficient stock removal, cutting stability and consistent finishing even on technical and abrasive materials.

• Z4 PCD cutting edges with chipbreaker for high productivity
• Heavy metal HDM body for maximum stability
• Ideal for CNC nesting and precision contouring

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z1+1 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z2+2 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.

Double Edge Folding V-Groove pcd diamond Router Bits for Shaping Aluminum Composite Material (ACM) such as Alucobond®, Dibond® and other brands a like.

PCD “V” GRooving shank cutter Z2 60° conical for chanfering operations and 90° inside angles.

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z2 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.

Positive helix carbide end mill Z3 with chipbreaker designed for finishing contouring, cutting and profiling on wood and composite materials. Provides high surface quality and controlled chip evacuation.

• Positive helix Z3 carbide cutting edges
• Integrated chipbreaker for smooth chip control
• Ideal for finishing contouring and profiling

HW helical cutter with positive Z3 cutting edges designed for contouring, cutting and shaping operations on solid wood, wood based panels and plastic materials. The positive helix geometry ensures smooth cutting action, reduced cutting forces and improved surface finish even during continuous machining.

• HW Z3 cutting edges for clean and consistent finish
• Positive helix for efficient chip evacuation
• Ideal for CNC routers and mechanical feed systems

PCD spare insert for edgebander jointing cutter with alu body.

Spacers rings no rectified

PCD SPARE INSERT FOR EDGEBANDER JOINTING CUTTER MOD. LIGHT FLEX ECO

No lateral cutting

Spacers rings

Spacers rings with double key

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.

Premium quality HWM. 2 precision ground cutting edges (Z2), 2 spiral flutes. Common shank and drilling diametre (S=D).

Premium quality HWM. 2 precision ground cutting edges (Z2), 2 spiral flutes. Common shank and drilling diametre (S=D).

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Surfacing cutter with carbide inserts designed for leveling large surfaces and machining rebates on MDF, wood and non-ferrous materials. Ensures constant flatness, stable cutting and high surface quality.

• Carbide inserts for long tool life and consistent cutting
• Ideal for spoilboard leveling and deep rebates
• Suitable for CNC routers and machining centers

Re-sharpening compact hogger in diamond with positive cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines.

Re-sharpening compact hogger in diamond with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines. 

Re-sharpening radius hogger in diamond with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines

Re-sharpening hogger in diamond step design, with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines.

Carbide helical cutter with up down Z2+2 geometry, designed to achieve clean finishes on both top and bottom surfaces of the workpiece. Ideal for contouring cutting and shaping operations on wood based materials and plastics.

• Up down Z2+2 geometry for double side finishing
• Solid carbide cutting edges for precision
• Suitable for contouring cutting and shaping

Coated carbide helical cutter with up down Z2+2 geometry, developed for high speed nesting applications on wood based panels and composite materials. Provides clean finishing on both top and bottom surfaces with long tool life.

• Up down Z2+2 geometry for double side finishing
• Coated carbide for extended durability
• Ideal for high speed nesting operations