Best sellers

Tool holder HSK63F with tollerance between the tool holder and tool house 0,003 mm.

• ER32 - ER40 taper shank toolholders;
• Maximum precision and reliability;
• Total elimination of any rotation imperfections;
• Constructed from high-strength steel for superior performance;
• Precision ground on all contact surfaces;
• Fast and secure tool installation guaranteed.

HW milling cutters Z1 positive. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, HDM (High density metal) and steel body.

PCD router bit designed for high-speed nesting and contouring on CNC machines. The Z4 chipbreaker configuration with alternating positive and negative cutting edges ensures excellent chip evacuation, cutting stability and superior surface finish on technical materials.

• Z4 PCD chipbreaker cutting edges for high productivity
• Heavy-duty HDM body for maximum rigidity
• Ideal for CNC nesting and precision contouring

Solid carbite high speed router Z2+2 with positive/negative spiral cut. Suitable for nesting operation and also routing, cutting and shape the panels on solid wood, chipboard, MDF and playwood material.

Replaceable standard ”ER40” collets (from 3 mm to 25 mm). Suitable for most conical chucks.

PCD shank cutter Z1+1 with copy bearing, eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD helical router bit designed for contouring and grooving operations on CNC and manual machines. The Z1+1 configuration with dual helix geometry provides balanced cutting action and consistent surface finish on coated panels.

• Z1+1 helical geometry with positive and negative edges
• PCD insert H 2.5 mm, regrindable
• Suitable for laminated panels and coated MDF

PCD diamond router bit designed for grooving operations requiring excellent surface quality on coated panels. The negative Z2 cutting edges and solid HW body ensure controlled cutting action and clean surface finishing.

• PCD cutting edges H 3.5 mm for long service life
• Negative Z2 geometry for superior surface quality
• Solid HW body for rigidity and stability

HW positive shank cutter to work door  lock slot. chip breaker Z3 with negative part for better finshing of plate house. Suitable to realize door lock slot and for routing, cutting on solid wood , laminated chipboard and plastic material.

Sawblade tool holder with shank for lamello clemex f22 and sawblades with hole 20/30.

Collet nut with chip extraction turbine applicable on tools holders HSKER32 HSKER40 EOC25 (DIN6388) and HYDRO ETP. The turbine replaces the standard collet nut or is externally applied to the HYDRO ETP spindle.

PCD diamond cutter designed for creating Lamello Clamex P-SYSTEM joints on CNC routers and the Zeta P2 manual machine. Ensures high precision, clean machining and long tool life even under intensive use. Ideal for furniture production, interior renovations, shopfitting and exhibition construction.

HW milling cutters Z3 negative. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.

HW milling cutters for finishing Z3 positive for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, HW body.

PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body.