Prices drop

PCD helical nesting router bit Z3+3 engineered for shank profiling and high output nesting on CNC machines with mechanical feed. The interrupted helix with top and bottom cutting edges delivers stable cutting, efficient chip evacuation and a clean finish, while keeping noise and vibration low on coated panels.

• PCD Z3+3 cutting edges for stable top and bottom panel cutting
• Steel body and PCD center cutting for rigidity and accurate entry
• Interrupted helix with positive negative layout for finish and chip flow

PCD nesting diamond router bit, resharpenable and built with an interrupted helix in four divisions for CNC machining with mechanical feed on coated and decorative panels. The HDM heavy metal body boosts rigidity and enables very high feed rates with low noise, efficient chip evacuation and a clean, consistent finish.

• 3.5mm PCD, resharpenable edge for long service life and output
• HDM heavy metal body for maximum stability and reduced vibration
• Z2+2 with positive negative edges for crisp, accurate panel edges

Regrindable PCD diamond router bit with interrupted helix, three divisions and three cutting edges engaged at the top and bottom. Predominantly negative helix, heavy-metal HDM body, PCD height H 3.5 mm. Built for CNC nesting: high feed rates, efficient chip extraction, good finish and low noise thanks to positive/negative cutting edges.

• PCD Z3+3 cutting edges for stable, continuous cutting
• Heavy-metal body for maximum rigidity
• Ideal for high-speed nesting

PCD diamond nesting router bit designed for high-productivity CNC machining on MDF, plywood and coated chipboard panels. The Z2+2 geometry and a 25° axial angle ensure efficient chip evacuation and clean finishing even in intensive nesting cycles.

• Specifically designed for CNC nesting operations
• PCD diamond H 3.5 mm for long tool life
• High stability and efficient chip evacuation

PCD diamond pantograph router bit H 4.5 mm designed for high-precision CNC contouring on wood-based panels and engineered materials.

• Regrindable PCD cutting edge for long service life
• 45° axial angle for a clean finish
• Ideal for MDF, chipboard and plywood

PCD pantograph router bit designed for high-precision contouring on coated panels, MDF and plywood. The 54.9° axial angle ensures optimal chip evacuation and clean surfaces even when cutting against the grain.

• High-strength PCD diamond cutting edges H 4.5 mm
• Positive axial geometry for superior finishing on delicate panels
• Ideal for pantographs and CNC machines

PCD shank cutter Z1 for lamello clamex P-system Z1.

PCD T-SLOT BITS Z2+2 for aluminum profiles.

PCD through hole drilling bit with high performance Z1. Suitable for through hole on laminated chipboard panels MDF.

PCD through hole drilling bit with high performance Z2. Suitable for through hole on laminated chipboard panels MDF.

PCD helical router bit designed for contouring and grooving on both CNC and manual machines. The Z1+1 layout with two helical sections offers a solid balance between material removal, cutting stability and surface finish, especially on coated panels.

• Z1+1 configuration with positive and negative helix
• PCD diamond insert H 2.5 mm, regrindable
• Ideal for laminated panels and coated MDF

PCD diamond router bit designed for high-performance nesting and contouring on CNC machines. The Z4 layout with alternating positive/negative cutting edges and a chipbreaker delivers efficient stock removal, cutting stability and consistent finishing even on technical and abrasive materials.

• Z4 PCD cutting edges with chipbreaker for high productivity
• Heavy metal HDM body for maximum stability
• Ideal for CNC nesting and precision contouring

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z1+1 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z2+2 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.

Double Edge Folding V-Groove pcd diamond Router Bits for Shaping Aluminum Composite Material (ACM) such as Alucobond®, Dibond® and other brands a like.

PCD “V” GRooving shank cutter Z2 60° conical for chanfering operations and 90° inside angles.

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z2 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.

Positive helix carbide end mill Z3 with chipbreaker designed for finishing contouring, cutting and profiling on wood and composite materials. Provides high surface quality and controlled chip evacuation.

• Positive helix Z3 carbide cutting edges
• Integrated chipbreaker for smooth chip control
• Ideal for finishing contouring and profiling

HW helical cutter with positive Z3 cutting edges designed for contouring, cutting and shaping operations on solid wood, wood based panels and plastic materials. The positive helix geometry ensures smooth cutting action, reduced cutting forces and improved surface finish even during continuous machining.

• HW Z3 cutting edges for clean and consistent finish
• Positive helix for efficient chip evacuation
• Ideal for CNC routers and mechanical feed systems

PCD spare insert for edgebander jointing cutter with alu body.

Spacers rings no rectified

PCD SPARE INSERT FOR EDGEBANDER JOINTING CUTTER MOD. LIGHT FLEX ECO