Cutters

PCD nesting diamond router bit, resharpenable and built with an interrupted helix in four divisions for CNC machining with mechanical feed on coated and decorative panels. The HDM heavy metal body boosts rigidity and enables very high feed rates with low noise, efficient chip evacuation and a clean, consistent finish.

• 3.5mm PCD, resharpenable edge for long service life and output
• HDM heavy metal body for maximum stability and reduced vibration
• Z2+2 with positive negative edges for crisp, accurate panel edges

Helical PCD diamond grinding router bit designed for profiling and edging operations on coated panels and wood based materials. The Z3+3 geometry with symmetric helix and 54.9° axial angle ensures an exceptionally clean finish even on delicate surfaces.

• 4.5 mm PCD inserts, resharpenable up to 8 times
• Z3+3 geometry for smooth and continuous finish
• 54.9° axial angle for superior surface quality

PCD diamond router bit designed for surfacing, drilling and rebate operations on panels and wood based materials. The 4 flute Z4 geometry with 0° axial angle and center cutting edge delivers flat surfaces and precise machining.

• 4.5 mm PCD inserts for long service life
• Center cutting edge for combined drilling and surfacing
• 0.5 mm corner radius to avoid surfacing marks

HW helical end mill with 1 flute and a positive Z1 cutting geometry, designed for grooving and shank profiling on CNC routers with mechanical feed. The positive helix promotes smooth chip evacuation and helps deliver a consistent surface finish while reducing vibration and material build-up on non-ferrous jobs.

• Single-flute HW Z1 edge for smooth cutting and clean sidewalls
• Positive helix for steady chip evacuation and less material welding
• Ideal for grooving and profiling on CNC machines with mechanical feed

HW helical end mill with a single flute and negative Z1 cutting geometry, designed for profiling and grooving with shank on CNC routers. The negative helix improves cutting control and helps prevent material lifting, delivering cleaner edges on coated and laminated panels.

• HW negative Z1 edge for controlled cutting and clean finishes
• Negative helix to reduce chipping on laminated materials
• Ideal for profiling and grooving on CNC routers

HW helical end mill with 2 flutes and a positive Z2 cutting geometry, designed for profiling, cutting and shaping with shank on CNC routers. The positive helix promotes smooth chip flow and stable cutting behaviour, ensuring consistent surface quality across a wide range of materials.

• Positive Z2 HW cutting edge for smooth and accurate cutting
• Two flutes for improved stability and controlled material removal
• Ideal for profiling, cutting and shaping on CNC machines

HW helical end mill with 2 flutes and a negative Z2 cutting geometry, designed for profiling cutting and shaping with shank on CNC machines. The negative helix improves cutting control and surface quality, reducing fibre lifting on coated and composite panels.

• Negative Z2 HW cutting edge for clean surfaces
• Two flutes for improved stability and control
• Ideal for profiling cutting and shaping on CNC

HW helical cutter with positive Z3 cutting edges designed for contouring, cutting and shaping operations on solid wood, wood based panels and plastic materials. The positive helix geometry ensures smooth cutting action, reduced cutting forces and improved surface finish even during continuous machining.

• HW Z3 cutting edges for clean and consistent finish
• Positive helix for efficient chip evacuation
• Ideal for CNC routers and mechanical feed systems

HW helical cutter with positive Z3 cutting edges and integrated chipbreaker designed for contouring, cutting and shaping operations on solid wood, wood based panels and plastic materials. The positive helix combined with the chipbreaker ensures controlled chip evacuation, smooth cutting action and consistent surface quality.

• HW Z3 cutting edges with chipbreaker for stable cutting
• Positive helix for efficient chip evacuation
• Ideal for CNC pantograph routers with mechanical feed

HW helical cutter with negative Z3 cutting edges designed for contouring, cutting and shaping operations on solid wood and wood based panels. The negative helix improves process control, helps reduce chipping on laminated surfaces and provides stable cutting performance with mechanical feed.

• HW Z3 cutting edges with negative helix for cleaner edges
• Better control and stability on laminated panels
• Ideal for CNC routers and pantographs up to 24,000 rpm

HW helical cutter with negative Z3 cutting edges and integrated chipbreaker designed for contouring, cutting and shaping on solid wood, wood based panels and plastic materials. The negative helix helps reduce chipping on laminated surfaces, while the chipbreaker improves chip control and cutting stability.

• HW Z3 cutting edges with negative helix for cleaner edges
• Integrated chipbreaker for chip control and stable cutting
• Ideal for CNC pantographs with mechanical feed

HW helical cutter with positive Z3 cutting edges designed for machining lock mortises on doors and windows on CNC machines. The positive geometry provides smooth cutting and effective chip evacuation, delivering clean mortise walls even on laminated boards and sized wood components.

• Positive HW Z3 cutting edges for accurate mortises
• Ideal for door and window lock pockets
• Efficient chip evacuation with mechanical feed

HW helical cutter with positive Z3 cutting edges and integrated chipbreaker designed for lock mortises on doors and windows on CNC machines. The positive geometry provides smooth cutting and efficient chip evacuation, while the chipbreaker improves chip control and machining stability even on laminated boards.

• Positive HW Z3 cutting edges for accurate mortises
• Integrated chipbreaker for chip control and stable cutting
• Ideal for door and window lock pockets

HW helical cutter with negative Z3 cutting edges designed for lock mortises on doors and windows on CNC machines. The negative helix improves top edge quality, reducing chipping and ensuring cleaner finishes on laminated boards and coated panels.

• Negative HW Z3 cutting edges for clean top edges
• Ideal for door and window lock mortises
• Stable cutting performance in CNC machining

Carbide helical cutter with negative Z3 geometry and integrated chipbreaker, developed for precise lock mortising on doors and windows. The negative helix ensures clean surfaces, high stability and excellent chip control on laminated and wood based materials.

• Integrated chipbreaker for controlled chip evacuation
• Negative Z3 cutting geometry for stable finishing
• Ideal for door and window lock mortising

Coated carbide helical cutter with up down Z2+2 geometry, developed for high speed nesting applications on wood based panels and composite materials. Provides clean finishing on both top and bottom surfaces with long tool life.

• Up down Z2+2 geometry for double side finishing
• Coated carbide for extended durability
• Ideal for high speed nesting operations

Surfacing cutter with carbide inserts designed for leveling large surfaces and machining rebates on MDF, wood and non-ferrous materials. Ensures constant flatness, stable cutting and high surface quality.

• Carbide inserts for long tool life and consistent cutting
• Ideal for spoilboard leveling and deep rebates
• Suitable for CNC routers and machining centers

FRESA ELICOIDALE HW POSITIVA D.6X22 SX ATT.6 Z.2 LT.65

Insert PCD shank cutter multitasking with interchangeable profiled knife and copy bearing. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials. 

Insert PCD shank cutter multitasking with interchangeable profiled knife and center cutting knife. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.

Insert PCD shank cutter with interchangeable profiled knife for cutting “V“ profiles at 90° / 91° Z=1. Suitable for profiling or for folding operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.

Insert PCD shank cutter with interchangeable profiled knife for cutting “V“ profiles at 90° / 91° Z=1+1. Suitable for profiling or for folding operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.

High-precision PCD insert cutter designed for surfacing and leveling operations on routers and CNC machining centers. Clean cutting, stable feed and uniform finish on abrasive boards, composites and non-ferrous materials.

• Replaceable PCD inserts for consistent performance
• Fast surfacing and accurate leveling in fewer passes
• Ideal for panels, composites and non-ferrous materials

CNC surfacing cutter designed for professional surfacing and leveling operations on CNC machine tables and large panels. The indexable PCD insert design ensures stable cutting, low noise and consistent surface finish on technical materials.

• Indexable PCD inserts for extended tool life
• Accurate CNC surfacing and table leveling
• Low noise and excellent surface quality

Insert PCD shank cutter with interchangeable profiled knife Z=1. Suitable for profiling or engravings operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.